Search results

If you do both; mailing for others and mailings for yourself, set up different MID's with the USPS or your scorecard will be dinged.

That's the point!

Use impose and enter a negative gutter in the center.

Would you share a picture of you "lazy susan" I tried building one myself but am not very happy with the clamping system.

mohawk has glued paper too https://www.mohawkconnects.com/products/paper/mohawk-superfine

On my canon's some "blank" pages click and some don't long runs I always check my counters for the first print. pre-press always places grey color images I can't see and want a black click.

I (unsuccessfully) tried this months ago, and will retry following these steps. once it works, Making these your default settings should make printing the files as easy as a right click.

I read about a VDP way to map the variable 1 side job to a 2 sided original which is basically what you want I just can't get it to work in practice.

He wants the columns to flow down 4 then over, ID is flowing across then down.

If you resend the missing batch do the records print?

Not yet. I am putting in a service call on the 750 and am going to point it out to the service tech again. Since there is no noticeable quality issue with the printouts its not a high priority. A service call for quality last week on the 6010 didn't change the readings but fixxd the uneven color...

sorry I miss read and thought the 100 load was short edge first.

I assume you have tried short edge turning the flap to the other side.

image is hanging? Post a picture please

Black clicks an a color machine cost more (for the most part) I don't think there is one simple answer for this (I used all the methods above) I feel the easiest (not always cheapest) is to send as big of sections to the black as possible not using any post sheet inserter. Send the next section...

The best luck and most consistent feeding of any envelope is to give then a slight curl so the 4 corners are bent away from the print heads. One time you want a frown not a smile.

Thanks for all the help so far. They are different servers, one is integrated on the back of the machine (but fiery) g2000 v1.0 and one is a standalone box a1300 v1.0; this has the spectro connected. Its also the one giving me the wavey lines. I never noticed that that the spectro was...

Same cws same spectro, calibrating my c750, as you can see the lines are smooth. btw cws version 5.8.1.100 I think my service company said that's the highest that will support all my hardware? I got the new spectro with the c750 install less than a year ago. The part that concerns me is the...

The date of the last calibration is always correct I try to do it every day. I thought about it being my technique but I don't get miss reads very often, I'm kinda proud of that. I will have my backup operator do it today and see if it changes. Tomorrow I try reading the same print twice to see...

Xrite i1 pro2, yes hand held. I always have 2 pieces of 100lb coated cover behind the calibration sheet.