• Best Wishes to all for a Wonderful, Joyous & Beautiful Holiday Season, and a Joyful New Year!

Search results

  1. V

    Need help calibrating topsetter 74

    Problem sorted, we cleaned and greased the endless screw of the laser head and now we getting better result.
  2. V

    Need help calibrating topsetter 74

    I dont have any positive plates at hand. I will try to get some from a neighbour. Here is a few more tests of all colors.
  3. V

    Need help calibrating topsetter 74

    Hello Maxon, I will try that tomorrow and post results. Could you advise how to set the values? I imagine you mean the set value in brackets?...I understood from the manual that it doesnt effect that tests. Its a Low value and a high value.
  4. V

    Need help calibrating topsetter 74

    Here is a test print. The dot shape is deformed.
  5. V

    Need help calibrating topsetter 74

    Hello everyone, I am trying to calibrate our topsetter 74 CTP, we are getting lines on the prints on the 45 angle and a deformed dot shape. This happend after the tech person changed two diodes. We are using sonora xtra3. I am following the user manual. When I screen the focus and zoom...
  6. V

    Help with lines showing only on black

    Hello Ronnie, will try this. thanks all.
  7. V

    Help with lines showing only on black

    Here is the test plate. Thanks Chris
  8. V

    Help with lines showing only on black

    Hi Chris, Here is a photo. Let me know if you need a closer photo. Thanks
  9. V

    Help with lines showing only on black

    Please could you tell me where you can see it? I cant seem to see the difference.. These are the settings , seems odd all at 2000 except 2540
  10. V

    Help with lines showing only on black

    the angle of 45 is having problems. He is a photo of my rip setting.
  11. V

    Help with lines showing only on black

    Here are the plates from the focus test, not sure what to look for. I have started at 1900 and intervals of 20 from left to to right. Currently i have set with 2540 dpi the focus at 2370
  12. V

    Help with lines showing only on black

    I'm afraid the tech is not here to run any tests, I am speaking with him over the phone to troubleshoot this issue. He asked to change the 45 angle from black to magenta. So 75 on black and 45 on magenta. Now the problem is on magenta. I am filming at 2540 dpi btw if that could be an issue. I...
  13. V

    Help with lines showing only on black

    I recently had a technician change some diodes on a heidelberg topsetter. Now I am getting these lines on the black plate. I cant be sure that we didnt change anything on the RIP these past months as we have been troubleshooting other problems... but we havent had these lines before. The...
  14. V

    Heidelberg QM46-1 Error 15-01

    Hello , did you manage to solve this problem. I'm also getting the 15-01.
  15. V

    Looking for cheap Ctp backup option

    I have a heidelberg Platesetter 74 and looking for a backup solution if we have some down time. Looking at these inkjet plates, is anybody using them?
  16. V

    Topsetter error E04 help

    Hello, I have this problem. Did you find the solution?
  17. V

    Printmaster 46-2 air leaking problem

    I am getting error 11-05 and no voltage on the solenoid valve and blackbox next to it. Ibhave cleaned the preassure gauge and the inside of the solenoid. Any ideas what it could be?
  18. V

    PM 46 air pressure error

    Hello, i have a similar problem. Error 11-05. Air is leaking at the blowout valve. I cant see any voltage checking with a multimeter. How did you solve your problems with the valves?
  19. V

    Topsetter 74 autoloader error

    Attached two other sensors. If I get close to the blue sensor it works.. Pam is it one of these you changed?
  20. V

    Topsetter 74 autoloader error

    The red light sensor works fine. But the blue one doesnt seem to do anything. When should it beep? When it detects metal?

InSoft Automation

InSoft Automation Unveils Imp Version 14

Revolutionizing Layout Planning and Automation

InSoft Automation announces the launch of Imp Version 14, the latest iteration of its industry-leading cost-based layout planning software. Packed with cutting-edge features, this release redefines efficiency, automation, and workflow optimization for printing and finishing processes.


Learn more…….

 
Back
Top