Search results

Thanks for this. The V80 I’ve looked at is a refurb unit at £6,000. Wouldn’t get a Konica anywhere near that price unfortunately :(

We are having a new first floor built and ideally wanted to move our label printing upstairs (I’ve also got a sheet fed label cutter and a memjet roll to roll label printer). The C3070 will be staying downstairs and I don’t particularly want to have to print the labels downstairs and then take...

We currently have a Konica C3070 and are looking for a second machine specifically for sticker sheets. We have tested our sticker sheets on our Konica C458 office machine and one of the papers (a compostable paper) doesn’t like the C458 resulting in the toner rubbing off. I can’t afford another...

Thanks for that. I just saw you recently upgraded to the C4070. Congrats. We are having a continuous problem with our c3070 at the moment where since the konica engineer replaced the belt and rollers on our fuser the fuser isn’t warming up properly so unless we make sure the printer is at...

We currently have a Konica C3080 as our production press but are moving into printing sticker sheets which we ideally need a second printer for. Not wanting to go down the route of a second ‘production’ grade machine I decided to try our Konica C458 that’s in our office but on the Matt sticker...

No sh*t sherlock

Our registration marks are all 12.5mm and we've not had any issues. The guidance says that the 12.5mm is from the edge of the sheet to the middle of the circle so that what we have gone by. Easiest way to sync your mac folders to a pc is either something like Dropbox, or a NAS/Server system. We...

hmm I've not actually tried to read the qr codes yet. Maybe I should give it a try. Yes, I have to say, the user guide, is extremely lacking and you do need to utilise support but the support is very good and thorough.

So, finally managed to get our LC600 up and running this week, and what can I say? I needed to contact support when setting it up as I couldn't get it to actually read the reg marks but they were very swift to answer (within an hour or so) and sent plenty of help. I now have the cutter working...

That model is based on the Graphtec ce6000 which is an old machine now. Still very capable but the reason we went for the LC600 instead was the barcode function so we could load multiple sheets of different jobs and the barcode would tell the machine how to cut it.

Sorry Lee, I have only just seen this so you may have bit the bullet already. Unfortunately, our LC600 is still sitting in its crate. I actually agonised between buying the LC600 and the Afinia L801. In the end we bought both (well we went for the VIPColor VP700 instead of the Afinia but the...

I was talking to a Konica engineer the other day and all it seems to be is a very slight upgrade over the 3070 with the addition of an optional module to measure the paper type.

Not too far off the U.K. price. First quote was £3499+vat. We asked for a discount and got offered £3199+vat. I counter offered £3000+vat and they throw in two packs of the SRA3 sticker paper and free delivery and the accepted. We did also end up buying the stand on top but don’t know if we will...

Your cost per click isn’t JUST paying for potential repairs though, it’s paying for your consumables too. Not just toners, but the drums/developers, coronas, fuser, etc, it all adds up. Having said that, we have a Konica C3070 and I absolutely love the machine but I wouldn’t run it without a...

How much have you been quoted? I’ll check what we paid.

We don't tend to do anything huge job wise if I'm honest, so it would be more a case of the printer not working at the start of the job (like we had an issue the other day that each time we tried to print more than a single page, the printer tripped a fuse inside and displayed a 'call an...

We did get a bit of a discount simply by asking. We took delivery of the machine a few weeks ago but it's still sitting in its crate as I want to set it up on video haha....must get round to it soon.

We currently have a Konica C3070 and in general are very happy with it, especially coming from a Xerox C560. We have been looking at buying a second printer that will be partly used as a backup machine but also for so specific jobs that don’t do so well on our Konica (such as ncr pads). We...

Thanks for the replies. The main requirement is to produce a new type of labels for products we send to Amazon fulfilment centres. Each individual label needs to have a unique 2D barcode that is generated from a csv file obtained from Amazon. In addition, it needs a standard barcode, and other...

Please don’t comment on my posts in the future if you’re just looking for an excuse to spam your website links.