Search results

  1. graficworx

    Linotype 560 Available for Parts

    If anyone needs any parts, we have a working Linotype 560 we took out of production just recently. We started using CTP years ago, but were still outputting film for use by screen printers and pad printers. If you need any parts, let me know.
  2. graficworx

    Polar EM 72 Parts Available

    We recently took our Polar Eltromat 72 out of service, and I saved all the control boards, switches, and blade stop cylinder. If anyone needs some parts, let me know. All four channels were working. I know the one time I had to have a board repaired it took me months to find someone to do it...
  3. graficworx

    Polar Electromat 72 Parts

    We just recently scrapped our old Polar Mohr Electromat 72 cutter, but I kept all the boards knowing how hard it is to find parts/replacements. Also kept some of the switches and the blade safety lock. If anyone is looking for parts, let me know. All five channels worked when taken out of...
  4. graficworx

    FS Polar Electromat 72 parts

    We just recently scrapped our old Polar Mohr Electromat 72 cutter, but I kept all the boards knowing how hard it is to find parts/replacements. Also kept some of the switches and the blade safety lock. If anyone is looking for parts, let me know.
  5. graficworx

    Future of the USPS

    We've all heard the media's "talking head" opinion in the impending USPS "crisis", but I wanted to see what my fellow printers thought. It could be disastrous for envelope manufacturers, and of course direct mail shops. What's your thoughts? I'll start out by saying it can't be allowed to fail...
  6. graficworx

    Champion 305CDC guide travel

    We have an older Champion 305CDC that had developed trouble traveling. When you enter a position, the guide travels all the way to the front, the counter resets, and then it travels back, past the desired measurement, till it gets to a spot around 9.945 where it gets stuck and goes back and...
  7. graficworx

    Xerox 7400 residual black toner

    I'm not sure if my subject accurately describes what I'm experiencig, but what is happening is that whenever we print from our Phaser 7400 we get what equates to a very fine black toner layer. It looks like you had the whole page at a 1-2% black fill. It's noticble on smooth white paper, but...
  8. graficworx

    Polar 72 technician in Hawaii

    We have purchased a Polar 72 in Honolulu, and will be shipping it to another location in the state via container. We are trying to find a technician to come and disassemble and re-assemble at the final destination. Does anyone know of any techs in Hawaii that are capable of this? We have...
  9. graficworx

    Rubber mat beneath ATF Chief?

    We have purchased an ATF Chief 117 1 color press, and will be moving it to a commercial/light industrial area. We have a bit of a concern with noise and vibration. Would it be possible to place the press on top of a hard rubber mat to help dampen the vibrations, or would this throw the press off...
  10. graficworx

    Xerox solid ink warning

    Not that anyone would try to use a solid ink machine for massive production runs, but I thought I would post this warning for even the MFPs. Xerox Solid Ink, including the new Color Qube, is a neat idea, sort of a cross between a Laser and an HP Indigo. The only problem is the "ink", aka WAX...
  11. graficworx

    Glossy coating on laser output

    I run a small print and design shop, using a Xerox Phaser 7400. I would like to be able to gloss my own output, instead of sending out for glossy business cards and the like. I have a BC cutter, and do my own matte cards, but have to send out glossy. Is there an inexpensive way of doing coating...

Print In the Eye of the Buyer

Canon White Paper
THREE PART SERIES:
FREE DOWNLOADS

Print In the
Eye of the Buyer

Download Free White
Papers Here

 
Top