Search results

  1. P

    Help with Magnus 800

    Yes, Nemo, you are right. At first we were confused by a categoriality of statements - "your laser head is faulty and it should be changed". Now we consider that we found cable damage. To be sure that the reason is eliminated, it is necessary to work successfully 2-4 weeks. I will surely...
  2. P

    Help with Magnus 800

    Hey all. December 5th we re received resumes from Kodak - your laser head defective and require replacing. We were told this is the first time 30 days ago, during this time we did about 2000 plates 790x1030mm and about 500 plates 459x525mm. Kodak invented the self-healing head from the ashes...
  3. P

    10 micron FM with Heidelberg CtP?

    Fm 10 mk with Heidelberg CtP? It's realy? Only Mark Tonkovich have information for it? I was holding a print samples CtP Сron (promotional sample plate maker - A5 plate and print it).
  4. P

    Help with Magnus 800

    We checked them out and I can not say that the cable ties are clamped tight. Service engineer says: 1) the laser head does not matter what expose plate 2) your laser head is faulty and it should be changed . After that we made about 2000 plates for sm- 102 without a single mistake . But when we...
  5. P

    Help with Magnus 800

    Thanks, we will check it. Regards. Pavel.
  6. P

    Help with Magnus 800

    Hi LoWang, 1) yes, 2) more often on drum. I don't understand it - yesterday the problem was gone by itself. We did not do anything. This occurs for several months. Service engineer arrives and throws up his hands - we are working. So it was already a few times. He said the work of the head has...
  7. P

    Help with Magnus 800

    Incomprehensible situation. If we send only the plate is 790x1030 (0.3 mm) Magnus works flawlessly. Once sent to the plate 459x525 (0.15 mm), there is a fatal error message (44500 or 44506 or 44501), and after that work is impossible for any type of plates. But if you turn off Magnus for 15-20...
  8. P

    Magnus 800 - can't expose a plate

    We can make a media 790x1030 - no problem. But 459x525... We are getting an error: "The exposure failed. Rcon error: Head command transporter failure (Error Code = 44506, Error category = 07 - Fatal, device cannot recover". The plate unload from the drum (completly OK). But next plates don't...
  9. P

    Staccato 10 mk are really 10 mk?

    Thanks Gordo. What must we do? In the first - we must decrease viscosity of our ink and decrease of a pigment (add oil to the ink)? Thanks Pavel
  10. P

    Staccato 10 mk are really 10 mk?

    I'm sorry that I haven't answered so long. I had plenty of work. I have usb-microscope now and I can show you my dots. 1_printed AM with FM_.jpg - it was printed with AM (sm 102). There was a lot of free space. I placed there control stripes FM 10 mk (1-bit tiff) and the FM-picture (10 mk)...
  11. P

    Staccato 10 mk are really 10 mk?

    ... I look after FM (any control strips and the my gold sheet) about three months. A few times, I've got good FM-printed sheets too. I've got a few different curves for FM (???)... I look for the critetion -- what is it better? In such a way I come to NDPC (G7)... thanks for answer... Pavel
  12. P

    Staccato 10 mk are really 10 mk?

    I place a control strip FM (1-bit tiff) in a free space of AM press sheet. The control strip FM is the CMY-only gray (width - 5 mm) -- make it possible to see like any FM printed images. I think that tone values of the single cyan ink is not alike the cyan ink into any printed images. Cyan...
  13. P

    Is it possible to strip only cmyk profiles from files in Prinergy Evo.

    The way I look you can "workflow templates" in Prinergy Evo = refine RGB to CMYK + refine CMYK ("strip embedded profiles"). In "math colors" of "refine RGB to CMYK" you don't check "strip embedded profiles". In "assign input device conditions": 1) you don't check "CMYK images" and "CMYK...
  14. P

    Staccato 10 mk are really 10 mk?

    G7 is a basis for “shared appearance” that aligns the appearance of diverse printing methods as closely as possible to each other... Can I use of G7-method to align the FM-tone response to the current AM? NDPC (CMY - only gray scale and K – only gray scale) is the standard of comparison for...
  15. P

    Staccato 10 mk are really 10 mk?

    Already it is the great help, Gordo, (my poor English hardly can express this quantity)! You literally pulled out two nails doubts from my head. Press sheets of Canadian postage stamps – it’s curiosity… but I hope to hold the press sheet (made me) before I can receive it from Canada (from...
  16. P

    Staccato 10 mk are really 10 mk?

    Thanks Gordo for answer. On the off chance, excuse me for my English, if you see mistakes… You say: «On press, those plate dots will be distorted according to the press condition (and your instrument's method of determining dot size)». OK. I understand, that my VIP CAM 122 is a plate...
  17. P

    Staccato 10 mk are really 10 mk?

    What’s size of dot Staccato 10 mk on the printed sheet? Theoretically – 11,5mk (if dot gain 15%)? According to my measurement on the printed sheet (plate reader VIP CAM 122): black, magenta, yellow – about 15-16 mk and cyan – 12 mk. Is it normall?

Canon Research

Canon
Advancing Productivity and Service Delivery
Enhancing the Print Customer Connection (Part 4)

Read All About It

 
Top