Search results

  1. C

    Screen PTR 8300 Error E517c PH25 sensor illegal.

    I found out the problem, 1 of the PH25 sensor which model is FSV21R the preset value lower than current value. Raise the preset value more than current value then it can work. Don't know why suddenly the value can out as it had use so many year without problem. Thanks
  2. C

    Screen PTR 8300 Error E517c PH25 sensor illegal.

    I found out the problem, 1 of the PH25 sensor which model is FSV21R the preset value lower than current value. Raise the preset value more than current value then it can work. Don't know why suddenly the value can out as it had use so many year without problem. Thanks
  3. C

    Screen PTR 8300 Error E517c PH25 sensor illegal.

    Last few day it gives this error after it unload the finished imaging plate and start loading the new plate to prepare for imaging. If I only load 1 plate and not put 1 more for standby into machine, it work ok. Today even I just put 1 plate and not putting 1 more for standby, it still cannot...
  4. C

    Screen PTR 8300 Error E517c PH25 sensor illegal.

    Last few day it gives this error after it unload the finished imaging plate and start loading the new plate to prepare for imaging. If I only load 1 plate and not put 1 more for standby into machine, it work ok. Today even I just put 1 plate and not putting 1 more for standby, it still cannot...
  5. C

    Error E4213: Secondary Scanning motor is illegal. PTR 8300 machine

    If I found the solution then I no need to ask at here.
  6. C

    Error E4213: Secondary Scanning motor is illegal. PTR 8300 machine

    Machine is Platerite 8300 I get that error code. I already restart/reinitialize the machine and now it work but I don't know will it happen again. Anyone know what is it?
  7. C

    door lock part for Screen PTR 8300

    Here can't find the 3d printer supplier. ChrisZ says it is easy to make with file, sandpaper and piece of hard plastic. How to do it with that?
  8. C

    door lock part for Screen PTR 8300

    How to DIY? As you can see from attachment. It is cracked and now it is not able to push the lock so I always have to manually open it.
  9. C

    door lock part for Screen PTR 8300

    what is the name for this? Can I find it online?
  10. C

    door lock part for Screen PTR 8300

    My Screen PTR 8300 door lock unit got problem. The white item in at my place got crack. What is the name for that? Is that possible to find a replace just for that rather than motor? My motor ok, just that white item crack only.
  11. C

    screen 8300s ctp take very long time load particular size of plate.

    ok, finally found out the place. After clean at there, it able to work. Thanks
  12. C

    screen 8300s ctp take very long time load particular size of plate.

    Right side? you mean got touch screen side?
  13. C

    screen 8300s ctp take very long time load particular size of plate.

    Can you show me the photo/image for that? I not very clear which part of it at there. I search website and service manual also cannot get a image on that.
  14. C

    screen 8300s ctp take very long time load particular size of plate.

    Today I tried from 670x560mm then 525x459mm then 510x400mm. It load and balance normally. So I think what Pabney say is correct to what I facing. Maybe most of the time when it from 670x560 to 510x400, it hard to balancing but I don't know why there is no problem when 670x560 to 525x459. Seem...
  15. C

    screen 8300s ctp take very long time load particular size of plate.

    nope. 670x560mm, 650x550mm, 730x600mm,... and other big size is 0.3mm thickness while 510x400mm, 525x459mm, 450x370mm is 0.15mm thickness. It doesn't go into calibration mode when thickness changes. Calibration never related to thickness change. Maybe. But if from big size to small size...
  16. C

    screen 8300s ctp take very long time load particular size of plate.

    Recently the CTP take long time load 510x400mm plate compare to last time. (The longest will be 1 minutes) Normally when the CTP running other size of plate (let say 670x560mm) after that if next job is not this size, it will have to adjust according to plate size and then load it then punch...
  17. C

    Back side of plate got some of white powder

    Recently after my plate come out from processor, the back side of plate got some white powder, same size of plate will have same pattern on that, different plate size will have different pattern. Anyone know what is the problem? how to solve? I tried to adjust the pressure of brush and roller...
  18. C

    Delta tower not working

    Just to let you know these are the event and error code that show out. (I not reinstall yet) With these code, do you think is the software problem? Event list show that "delta tower could not be started! (RB_RC_ErrMax Repeat!) At application event log, it got RecCtrlNT It also got this in...
  19. C

    Delta tower not working

    Do you had any installation manual? (A detail one) Last time it is installed by other people and now we not able to contact that person. We got the software in hand but I remember when he install, it need to setup a lot of thing. (something like tricking the system to think delta is another PC...

Canon Research

Canon
Advancing Productivity and Service Delivery
Enhancing the Print Customer Connection (Part 4)

Read All About It

 
Top