Search results

  1. M

    Illustrator only has one font "Myriad Pro"

    Windows system. Alt+Control+Shift tried. Same result. With no document open -> Type -> Font -> no drop down list at all!
  2. M

    Illustrator only has one font "Myriad Pro"

    I don't use Illustrator much, but I just noticed I only have access to Myriad Pro font. Generally I use InDesign, which has a lot of fonts. After reinstall, no change. Any thoughts?
  3. M

    EBM 19 PLC Cutter

    Model 19 PLC Serial 44806A1214
  4. M

    EBM 19 PLC Cutter

    I just downsized. My new place doesn't have room for my old 30.5" Challenge. I bought a used EMB 19 PLC cutter. Does anyone have one? What about a manual? Any experienced help appreciated, Ralph Manassas, VA
  5. M

    Xerox Versant 180 Mystery

    Thanks for the pictures. I will examine to see if anything is stuck in there.
  6. M

    Xerox Versant 180 Mystery

    Thank you for the suggestions.
  7. M

    Xerox Versant 180 Mystery

    Ah Ha! The game is afoot! Second side paper path is our main suspect.
  8. M

    Xerox Versant 180 Mystery

    Good idea! I will try it.
  9. M

    Xerox Versant 180 Mystery

    Ok, for all you V180 owners. I am printing a job, single sided, 20# cotton writing stock. Pulling from paper tray 1, stacking on top output tray. If I finish FACE DOWN, I get a dog ear on the leading edge. If I finish FACE UP, no dog ear, runs perfect! Any idea's? (Yes, I ran the job face...
  10. M

    Xerox V180 Windows 10 install gives me the wrong driver

    I have two systems. System A, when I add printer, finds V180 does the install, shows Driver Xerox EX-i 180 Print Server US 1.2. System B (when I do the exact same) shows Driver Microsoft PS Class Driver. I can click on the down arrow and see a list of print drivers. This list shows Xerox EX-i...
  11. M

    Xerox Versant 180 top oversize tray not homing

    Mystery Solved! Turns out, the bearing on the Shift Screw had moved out of place. Letting the Shift Screw Gear move out of position, therefore no homing. Put the bearing back in place. Problem Solved!
  12. M

    Xerox Versant 180 top oversize tray not homing

    I have taken the side panel off. I can see the lower tray homing, but the top tray doesn't home. There are three sensors on the inside back left corner, that correspond with three metal tabs on the tray. Has anyone had this problem? If so, how do you find the bad sensor or do you replace all...
  13. M

    Xerox Centreware setup

    AH HA! Yes, it is showing an error code 078-251. Suggestions on resolving this error?
  14. M

    Xerox Centreware setup

    Azehnali, I wanted to turn off Smart eSolutions trying to connect to Xerox. I finally figured out what I was doing wrong, so now I am in CentreWare. Turned off Smart eSolutions. Made some other minor changes. Now my next problem is the machine won't go into energy save or sleep mode. I have...
  15. M

    Xerox Centreware setup

    Batprt, Did what you said. Type IP address of Fiery. Bottom right hand corner of page... This brings up a second WebTools|Home tab (now two tabs say WebTools|Home). Tried Chrome and Internet Explorer browsers, same result. Does Fiery offer online support? I am so frustrated, I'm ready to...
  16. M

    Xerox Centreware setup

    Progress report: I do have a Fiery RIP on the V180. Tried the 100.100.100.101 and 100.100.100.102 (I think this is the one for my machine). No luck, just times out. My Xerox D125 has no rip. I can get to CentreWare by opening a browser and typing in the ip address (192.168.1.155) (attached)...
  17. M

    Xerox Centreware setup

    Thanks, I'll try that
  18. M

    Xerox Centreware setup

    I'm trying to setup my Xerox Versant 180. Some of the configuration settings, seem to be accessed through "Centreware". I have downloaded the setup for it, but I can't get past "Database Server". Anyone who has setup Centreware, can you step me through this?

Canon Research

Canon
Advancing Productivity and Service Delivery
Enhancing the Print Customer Connection (Part 4)

Read All About It

 
Top