Search results

Hello to everyone . Is there any place where i can get information about the templates , special marks to use with this machine . If possible one pdf manual will be great . All the Best padrao

Hi to all . Is there anyone using the DIPSDC,version 2 ? What experiences do you have wotking with one CD74 with Prepress Interface and close loop only . Can this be used to control jobs with a very very short printing length, like for example 200 sheets . . i Have some problems with the...

Hi . I am facing some problems with printing labels on one old SM74 Cptronic 1.04 . The printer guy says the problem is from plates, and i say the problem is on your press machine . The printer is complain about the labels from the middle are different from the left and right side . The press...

Hi to all . I have one question about freehand gradients . I have one file, with a gradient from freehand, witch change from from 6 to 0. After several test i always gets the banding, the steps are very visible . Is there any way to produce a smooth gradient from freehand ? See attached files...

I have one problem with this model, as soon i switch the machine, automatically start to work the Dryer ,water valve open and the hearts on, like he gets film on input . I heve check all the parameters and all appear to be ok, via diagnostic i can start, test, all the sensors and motor´s all...

What do you think will happen with offset printing? Packaging is the last refuge? Much of the work offset are disappearing with the Internet, information, newspapers, and the printing lenght are getting shorter Regarding digital printing i don´t see a good future for tonner based machines...

Hi . I hope any one can help understanding where the problem is comming , I have one file ,witch i can print ok with corel X3, X4 but on X5 always get postcript error. " %%[ Error: typecheck; OffendingCommand: ifelse ]%% Stack: {--pop-- --currentoverprint-- {false} {SeparateInColor {0 0 0 0...

Hi . I saw the memjet videos for ptinter´s A4 and A3 and plotter´s and they seem to be veryyyyyyyy fast printing . Are they realiable ? Whos has any experiencie with this printer´s . All the info here: Home | Memjet All the Best Padrao

Hi . I need one user manual in PDF for one old plate processor "DuPont-Howson Autolith" operation manual. Where i can find this manual, or anyone can send to my email : ppadrao@sapo.pt All the Best Padrao

Hi sometimes when boot the Brisque RIP it stops booting with the following message " Default catch!, code=fff0300 at $SRA0 00c1B030 $ SRR1: 00002030 ok This message appear on white screen , Any ideas what can be done ?? All the Best Padrao

Hello. I have one question regarding this plate, after doing the linearization on plate/RIP, i get the correct values 5% =5% 50%=50% . . . . But after a print lengh of 100, 200 sheets if i measure the 50%=45%, and remains on that for ever. what could cause this change, if i measure 50 %...

Hello to all . I have some problems with this plate, i can´t linearize correctly . The dot changes on all the plate . For example if i measure one plate with 50 %, i get differences of 6 % from the left ,middle and right side . The temperature the oven it´s correctly, i get 110 ºC-115ºC...

Hi . I have a problem with signa witch is not runing in only on macintosh . The installaer runns ok , but after start a new job the job assistintan closes automatic . I have check the java version , he as the java version 6 and 5, 32 and 64 bits. I have also change the java preferences to...

Hi everyone . Who has installed one metadimension 6.5 to connected two diferent devices via speedway . Example one CTP Suprasetter and one old Quasar direct connected . How the system handle this configuration ? It work or ir there anyone waiting for my response . I think it must work because...

Hi i need one solution for the PDF`s with very complex vector´s inside . The PDF is small format, but this will mounted on one sheet size 1000x700, and after send this job to metadimension it take 2 to 3 hours to output the job on CTP . My question is what can be done on PDF or application to...

Hi i need one solution for the PDF`s with very complex vector´s inside . The PDF is small format, but this will mounted on one sheet size 1000x700, and after send this job to metadimension it take 2 to 3 hours to output the job on CTP . My question is what can be done on PDF or application to...

Hello to all .One thing is confusing me . If the Azura plate only old 2% to 98% and one maximum of 240 Lpi, what coud be wrong if i send one job with Hybrid Screen of 400 Lpi. Is the plate ok for this kind of screen ?? I have some costumers working like this without any problem,but this make me...

Hello to all .One thing is confusing me . If the Azura plate only old 2% to 98% and one maximum of 240 Lpi, what coud be wrong if i send one job with Hybrid Screen of 400 Lpi. Is the plate ok for this kind of screen ?? I have some costumers working like this without any problem,but this make me...

Hello to everyone . I have one strange problem with this plates to print on Sthocastic screen . The proble is the density of the ink is getting high, during the printing , i have do stop the machine Komori 4 colors , clean the plate 200 sheets more stop clean . . . With conventional screen o...

Hello is there any driver for the sentinel dongle for prinect signastation 3.0 . I only have mac´s inside , how can i install this ?? All the tries i had made result in no acess to license server .Is there any solution, without installing the license server on PC ??? All the Best Jorge Azevedo