Search results

  1. D

    C-8000 Global Density

    We believe we're leaving out an important step in our linearization of our C8000 proceedure. And we think it's the step called "global density" that's run before any of the linearization steps. Thanks.
  2. D

    Epson 9700 and EFI Best Color config ?

    Our epson 10600 that we used for imposition proofing has finally bit the bullet. We send our impos from esko AE10 through a BestColor 5.0.1 for ripping for the proofer. My question would be if we have a chance that Bestcolor rip would drive an epson 9700.
  3. D

    Registration Issues with 100# Cover, Docucolor 260

    Registration Issues with 100# Cover, Docucolor 260 Johntron. I quit running #100lb UNCoated through our DocuColor 260. It measures over the grammage rated for the machine. Besides sounding like a tank going through the palmetto bushes.
  4. D

    Epson 10600 ImpostionProofer Manual Nozzle Clean

    We use our 10600 for impostion proofing only and on 70# uncoated text weight. Ordered some Epson cleaning solution for a try at cleaning the magenta nozzle. I've tried the cleaning button when the mag. stops working and afterward will resume printing..for awhile. Then a power clean for those...
  5. D

    Energy Elite Question

    Thank you.
  6. D

    scope and cip

    Re: scope and cip Inkplanner can only work after the 1 bit tiff is created. so create a ticket the steps of .... expose .. then... inkplanner. use CIPress to configure the cip file that you need, path, etc.
  7. D

    Scope to Suite 7 self install

    Just getting around to upgrading and we want to do a self install and asking around for any experiences. snafu's and such. We've been using Scope for almost 2yrs now and love it. But with a upgrade to Leopard on our Xserve we're running into some conflicts. (fast impose) So, anyhow, i've got...
  8. D

    NappCoat Plates

    We used these NappCoat Flexo Plates from MacDermid for our UV press which we using another process to get the plates. The plates are 838mm x 1051mm. We have 3 boxes of 10. Selling the three for $2400. US. (org. $3870 US) Carl @ 904.398.5141
  9. D

    Web Growth Question

    Re: Web Growth Question Thanks for the reply. Yes, that's what I'm refering to. How do you go about minimizing this phenomenon?
  10. D

    Web Growth Question

    Web growth. Try'd googling that! We'll I did and found out the www is getting bigger alright! I have a series of questions about web growth and would like to start out by asking it's true down and dirty definition. Carl
  11. D

    Suite 7 and training

    Re: Suite 7 and training Well, we haven't upgraded yet. 2 issues remained. One, is that we wanted to try the HiLine screening for a trial period, which is locked in to the version Scope your using. Second, r3 was,has come out so, was waiting for that was sent, which I've just received. so...
  12. D

    Future of the 43 Wide Proofer??

    Re: Future of the 43 Wide Proofer?? Debbie We rotate 2 sets of waste bin "diapers" . When the bin gets full, dispose the waste ink in our recycler , rinse the diapers with warm water, dry and reuse. Also for the print head diaper too. Been doing this for years now. We really want to keep...
  13. D

    Suite 7 and training

    We are on the verge of upgrading from Scope 3 to Suite 7 and are wondering about training. Anyone else been down this road yet. We've been Scope users for a little over a year now are curious about the upgrade and/or ups and downs. Thanks
  14. D

    Aqueous Coating in 5th unit Web?

    We have a 5c Rotoman Web heatset (new to us) and are toying around with the idea of using gloss aqueous in the 5th unit. We too are interested in getting some pop off the sheet. (as questioned in other recent threads.) We've used some spot and overall varnish and not getting the snap as we...
  15. D

    Webcenter...question

    Just wondering who's using Webcenter and your experiences with using it. What program do you use to change skins.? Edited by: D_Max on Jan 8, 2008 1:04 PM
  16. D

    Dolev Film Spreader Question

    Re: Dolev Film Spreader Question Hmm sorry I'm not a tech by any means and should be more specific. I've now found the op manual. It's the Film Roller Arm that's the culprit. I can only move the brass ring it's attached to about an inch. looking through the end position side of thedrum I...
  17. D

    Dolev Film Spreader Question

    Good day. We've sold our Dolve 800 and I'm locking down everything for shipping. As I was looking for the laser lockdown spot, the film spreader dropped to the down position and i cant get it back,dang it, and now i cant get the carriage to move at all. I'm getting these errors in utl...
  18. D

    LCD Monitor setup for production

    Re: LCD Monitor setup for production Well, i can't say i didn't already know that, our retoucher is using the canned SWOPv2 in photoshop as the default and it's getting him in the ballpark but..... having to run and wait for the color proof is like a long line for your hot dog and beer. thanks...
  19. D

    LCD Monitor setup for production

    Good day all. We have a Apple Display 20'' that 's on our scanning/retouching station. We'd like to simulate coated / uncoated stocks and be able to view the printing results for each. Our color profiling systems doesn't create icc profiles so we're looking for another way to "dirty up" ,so to...
  20. D

    Cyrel Plates

    Re: Cyrel Plates Look at the Gerber Sector. A plotter looking unit that uses a plate from OEC graphics. We've just installed one and for the majority of our UVing will work fine. Some finer detail work we may have to send a file to OEC for a one day turn around on a Cyrel plate. It will plot...

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

 
Back
Top