Search results

  1. K

    HUV Ink and stochastic screening

    Dear all, i do not want make duplicity - if you have anything to this, please give me feedback in post: https://printplanet.com/forum/ink-substrates-and-consumables/ink-substrates-and-consumables-discussion/287329-huv-ink-and-stochastic-screening
  2. K

    HUV Ink and stochastic screening

    Dear colleagues, has anybody of you experience with stochastic screening (preferably Staccato) and HUV ink (Komori)? What about TVI - it is uncorrected TVI comparable to uncorrected TVI at conventional print process? What about printing dot quality? Thanks for any insight! Best regards, Kamil...
  3. K

    software for building dot gain curves?

    Hi Iazz, interresting tools, but one note: if you will need more than 3 iterations, something is really going bad. In fact, iterations are provided by most applications, but in real, they are just some kind of placebo. beanz: You can use ColorPort from X-Rite, you can easy compute dot% from...
  4. K

    Prinergy Connect / InSite problem

    Hello Joe and MitchtheMitch and thank you for reply, my thoughts about "sense" was here only to support my claim, that something was changed. Kodak support dont believe me (yes, this is like in some crazy movie). Sorry if my bad English contribute to any misunderstanding. Joe: If you check...
  5. K

    Prinergy Connect / InSite problem

    Dear colleagues, please, help me with strange Prinergy/InSite issue. Installed it's Prinergy Connect 6.1.2 a InSite 6.7.1., and, to the my best knowledge, behavior of the system changed, literally overnight. Some of the functionality has gone, some is different. Nothing has changed even after...
  6. K

    Print problem - bigger dots (Kodak Evo, Maxtone, chinese plates)

    Dear Gordo, thank you for your advice (and for your kind words), and sorry for late reply. Yes, problem with plate is probably the only possible reason (guy from local Kodak office suggested me that maybe this can be caused due to irregular flow of developer, but he cannot explain how this can...
  7. K

    Print problem - bigger dots (Kodak Evo, Maxtone, chinese plates)

    Hello friends, please, can you help me with strange behavior we saw on printed magazine ... There are some stripes on printed page, and i mean on one page from eight on signature, and on particular place on this page, all others pages are OK. This artefact is exactly same through entire print...
  8. K

    Prinergy EVO Hi-res print JTP problem

    Hello Stephen, everything was OK, nothing important was lost, we can continue work as usual. We did backup, as you suggested, just to be sure, but no problem occured. KamilT
  9. K

    Prinergy EVO Hi-res print JTP problem

    Hello Stephen, thank you for your advice, Level 2 did resolve my problem. Again, thank you very much, KamilT
  10. K

    Is the Death of Offset Near?

    Hi all, you can't compare offset to Epson printers, this doesn't have meaning. Jetpress 720 is right choice to compare with offset. Quality is very good, but still, price tag is high for 2700 B2/hr machine, and there are some others catches, like primer etc. Offset is not dead and will not be...
  11. K

    Prinergy EVO Hi-res print JTP problem

    Hi all, We are using Prinergy Evo 5.3 for some years. From yesterday we have problem with hi-res printing jtp processor. Jobs are stopping and waiting just before entering processor. If we set priority to "urgent", data are raster immediately without problems. We have free space on the disk...
  12. K

    Softproofing with Eizo LCD and CP2000 - lighting conditions?

    Hi Rich and BeauchampT, Not, monitor is set near to max brightness (Color Navigator allow 200 cd/m2 max for this unit). As BeauchampT pointed, with brightness increasing, i am getting worst accuracy, especially in yellow and related colors. With brightness about 100 cd/m2 we have deltaE in...
  13. K

    Magnum 800 Quantum - loose laser head?

    LoWang, PACH, I have few information from operators (not so much as i was hoping). First time, the problem manifested this way: morning operator switched unit on, and he was able to image few plates. After this, next plates was "exposed", device not reported any error, plates was pulled out...
  14. K

    Softproofing with Eizo LCD and CP2000 - lighting conditions?

    We are installing EIZO LCD for softproofing with the console CP 2000. Color matching is good, but the picture on the screen is darker than on the sheet. I think the light console is set too high. The monitor is set to 160 cd/m2. Light reflected from the sheet is measured by the eye-one pro...
  15. K

    Magnum 800 Quantum - loose laser head?

    LoWang, PACH, thank you, on Monday i will have additional information. Thank you KamilT
  16. K

    Magnum 800 Quantum - loose laser head?

    Hi LoWang, thanks for reply, i dont know what is "Z-Stage", sorry. This is first time ever when we experienced this problem. We dont know nothing about focus, as device stopped completly and dont produce any plate. Both times this happened overnight, when device was not operating - evening...
  17. K

    Magnum 800 Quantum - loose laser head?

    Dear all, our platesetter Magnum 800 Quantum had now twice in very short delay (cca 2 weeks) same problem - device stoped working and Kodak technician says we have loose laser head, which is (according to technician) very rare problem. Threy suspect that someone damaged device intentionally or...
  18. K

    New Kodak Will Sell Nothing to Consumers

    Current Kodak is a terrible company. Fortunately, at least they not much destroy the products they bought from Creo and others. Our local Kodak representation is a tragedy. You can send question or ask for advice or help, after week of waiting they send you back just a price list. Btw, recently...
  19. K

    XPO 64-bit compatibility and Prinergy disk usage ...

    Dear all, i need to know if Kodak XPO does support 64-bit OS. We want upgrade from 32-bit Windows Server 2003 to 64-bit Windows Server 2008 and we have Prinergy and Xpo installed on the same machine. We have XPO 3.2.49 ... And my second question: is Prinergy using system HD singnificantly? We...
  20. K

    Wide Format Acuity HD Advanced Banding

    Hi Gregg, agree with kansasquaker, and here is one suggestion more from me - check everything related to lamps, especially the glass under the lamps - must be perfectly clean. All the best Kamil

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

 
Back
Top