Search results

  1. A

    Inking of non printing areas on ctp plates on start

    Hi we are ctp bureau. Time to time some our clients send us prints on attached photos. It's happen immediately after printing start. After cleaning with plate cleaner, problem solved. We are producing plates for many printers. Some clients are happy when somebody reports such problem. Everything...
  2. A

    Ptr4300 Servo unit does not enter the "Ready" status

    Hi guys How to solve the problem: E0127 - Servo unit does not enter the "Ready" status. 2 years few times per day Ptr4300 gave error: E0127 - Servo unit does not enter the "Ready" status. Finally after executing: Adjust offset from Input parameter/Drum parameter screen, this error reached...
  3. A

    Lotem 400v very often load 0.15 plates with small diagonal errors in gripper

    Hi guys problem with Lotem 400v - 2001, manual loading. After all there is often small diagonal errors (something like 0.5mm - 1 mm) when working with 0.15 plates. Any idea where to look? In loading system? In gripper rollers? Anywhere else? With 0.3 plates there was no errors at all.
  4. A

    Lotem 400v 24 diodes not expose well .15 plates

    Hi guys we have Lotem 400v with 24 diodes. Machine is working very well with .3 plates from different suppliers. The problem is that using internal tables for laser power plates .15 are too underexposed. We try to increase laser power by 10-15% but with no good result. Any opinion will be helpfull.
  5. A

    Topsetter 74P / 102P speed on 745/605 plates

    Hi guys does anybody know what machine will be faster producing 745/605 plates - Topsetter 74P or Topsetter 102P. Rated speed of Topsetter 74P - 20 plates 50/70 per hour. Rated speed of Topsetter 102P - 13 plates 100/70 per hour.
  6. A

    Looking for Scitex Lotem Local Controller board version 3

    Hi guys just looking for Local Controller board version 3: PWB # 188A2L658B CAT # 503C2L658S Regards
  7. A

    Looking for Fast pif interface card

    Looking for Fast PIF interface card.
  8. A

    Lotem 400v erratic loading plates

    Hi colleagues Our Lotem 400v year 2001 erratic load plates. Plate is loaded and clamped well with head gripper. Plate is going well on the drum. Back gripper is open and move to plate well. After all gripper pressure arm not going down and drum not start to rotate. Manually unloaded plate has...

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.

Learn how…….

 
Back
Top