Search results

  1. ashwini singh

    Specs for a 4 Color Press

    Hi Planning to go with a new 4 color press and wanted some opinions on 1)LED vs Conventional. Led apart from costs of ink seems to have the following in its favor : · Instant drying · Better color gamut · Great on uncoated and plastics Is there anything I am missing here ? 2) Display...
  2. ashwini singh

    Any solutions for a quality hard case unit with shorter quantities

    Hi We have a book printing unit in New Delhi, India . Our current problem is space and volume because of which we cannot install a big casing in machines ( even used ) as we don’t have that volume and don’t have space because we are in the middle of the city. We currently use semi automatic...
  3. ashwini singh

    Black and White Printing on Offset - never cracked this subject

    Hi Guys, what would be the best way to print a high quality black and white coffee table book. I know softwares and editing can go upto any extent, but i am getting CMYK edited images from the agency and not much can be done in pre press. Printing black and white in CMYK always has the magenta...
  4. ashwini singh

    6 Color UV or 7 Color UV press

    Hi, we have been planning a shift to UV printing and packaging from a conventional 4 color commercial printing unit. i recently had a visit from an printing engineer who has been recommending the 7 color UV presses which can print CMYK + RGB to produce a huge color gamut. Also that 6 color...
  5. ashwini singh

    Is it wise to consider a second hand UV press ?

    Hi All , having run a commercial printing unit , we are considering getting into commercial Uv printing and for that are considering a CD 74-6+LX-F second hand having run 8.5 million impressions. We have purchased second hand machine in the past and have succesfully run them and are considering...
  6. ashwini singh

    Sheets Warping after Online coating

    Hi, My name is Ashwini. we have been facing a lot of problems while online coating on our cd 74L. After printing the sheets tend to warp and develop waves due to which our hardbound books are not closing properly. We have seen the same jobs being printed by other printers without these waves...
  7. ashwini singh

    konica c 6000 problems with 90 gsm gloss art paper

    Hi i am having problems running any gloss art paper below 130 gsm on my konica minolta c 6000. not even 100 gsm , the service engineer says that 130 gsm and above works. This is ridiculous as the machine states 64 gsm - 300 gsm(sales) on art paper, does anyone have any experience or input on...
  8. ashwini singh

    Gold Silver .. metallic printing techniques

    Hi My name is Ashwini and we have been trying to print gold and silver on jobs for a while and frankly have not been able to get even decent results. The color output is so bland and after coating the shine of these metallic colors goes. I have tried multiple inks and tried but can see only a...
  9. ashwini singh

    a good Web to Print solution presently

    Hi we were planning to invest in a web to print solution and have been confused with so many demos and sites that it is now all very confusing. We would like to start with a b2b store we can cater to our clients and then go to the store front option. could anyone help me with some good tried...
  10. ashwini singh

    how do i figure out what kind of dot shape to use where?

    what is the basic way to start planning jobs by just a glance that what kind of dot and screen ruling should be used. ofcourse the paper would be known to us.
  11. ashwini singh

    Post riping pdf or jpegs or tiffs

    Hi, we are recently using heidelberg ctp and workflow. We have installed a software where we take out our plots/proofs after ripping for approval where we avoid all possibilities of errors happening while ripping. All errors are recognised at the plot stage only leaving us care free that any...
  12. ashwini singh

    What course can i pursue to gain indepth knowledge of the pre-press

    Hi, I wanted to educate myself on the pre-press front and was thinking of doing a short 1-2 year course on the subject. The idea is to learn how to manage and print good images, i.e. our clients here so many times submit bad quality images which we have seen other people improve to a great...
  13. ashwini singh

    How to interlink pre-press- press effectively

    Hi All, we have recently bought a ctp and an epson proofer with EFI. We are planning to calibrate the proofer (as assured by Heidelberg and our EFI dealer) that they will calibrate the two output systems to quite an extent. Our proofs and Machine prints will be very close and at-least in the...
  14. ashwini singh

    what is the best way to print black and white images

    Hi , we plan to print a black and white calender from images i clicked from my visit to the everest base camp. Thne thing is that last time i tried to print a black and white calender/sepia the depth and color was not staisfactory. How do i make sepration in order to print black and white the...
  15. ashwini singh

    Grain direction of the paper

    Hi How important is the grain direction while printing? how can one figure out the grain and how is the planning of the job to be done? Does grain direction effect binding more or printing also as much
  16. ashwini singh

    Techkon or Xrite

    Hi wanted to know which densitometer would be the right one to use. I am sure both are good as they are reputed companies but i have heard that xrote has problems with its motor . We are just setting up a ctp unit and using pre-press interface to attach our 2 presses all equipment is heidelberg...
  17. ashwini singh

    Image enhancement and color corrections

    Hi, we regularly have requirement to treat and enhance images for printing. could somebody recommend any professional agencies who take these jobs up..or a an alternate source where i can get the job done. Ashwini
  18. ashwini singh

    Instant Gate and Pre-Press Interface

    Hi, We are recently going for a heidelberg pre-press interface on our machine and using cip3 to boost our production in terms of reducing make ready times and paper wastage. Getting into color we are planning to go in the next stage. Could anybody recommend what all hardwares and softwares will...

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

 
Back
Top