Search results

  1. R

    GTO-52-4 2002 year of manufacture. Air pump.

    Try Google if you have it, and type in GTO 46 Lubrication. You will see a Youtube Video with some information that might be helpful.
  2. R

    29" DI Press

    Heidelberg did make a SM74 DI press. It could have multiple units and a coater. It had a Creo imaging head on every printing unit. It ran operated with an Alcolor dampening system and could run conventional plates if needed. The plates were imaged on the press in register with ink profiles.and...
  3. R

    Ink train and Oscillator roller

    Read the following information on Lateral ink distribution. Read the final pages of the PDF. The same theory applies to the SM102 press. By changing from White to Red the ink charge will start from the gear side moving to the operator side or vice-versa. Check previous posts on this subject.
  4. R

    Unknown Part

    It is a pressing bar that is used for changing Impression Cylinder jackets. It supports the new jacket to the cylinder so that it can be secured at the tail edge. If you look at the tail end of the cylinder you will see threaded screw holes where the bar can be attached. In some cases customers...
  5. R

    Printer turns down work

    Back in the late 90's, there was a printer in Toronto that was taken to the Human rights Commission. He was fined $5000 for refusing to print something for an organisation that he believed when against his religious beliefs. Google Scott Brockie loses decision at Court of Appeals. According to...
  6. R

    Password for DryStar 2000 doesn't work

    Could you post a picture of the key pad. I don't think you push the y button. You have to push a button with a diagonal arrow.
  7. R

    4 color sm-52

    The drag should be even on both sides and tighter in the middle. The pan roller has a crown so if you go across with a feeler gauge it will be slightly tighter in the middle of the roller.
  8. R

    4 color sm-52

    Start with these settings for all inking rollers and dampening system. Whether or not you run integrated or non integrated the settings are the same. Check night latch position also. If you require help with this let me know. See attached Roller Diagrams from Heidelbergs Profi tips. Us the SM52...
  9. R

    4 color sm-52

    Are you looking for a roller setting regarding ink stripes? Or do you wanted to run integrated or not integrated? You only have one choice, either integrated on or or off. Does the press have Vario. What year is the press. Please provide more information.
  10. R

    Heaviest coverage towards gripper or tail??? The age old debate...

    These days I imagine that most modern presses, have the capability to distribute the ink charge at the gripper, middle or tail end of the sheet remotely from press consoles. This can help alleviate the problem used to be a press operator's nightmare. Other opinions posted are also quite valid...
  11. R

    Speed master 52 packing slip

    One other note. I am sure your are doing, this but I have to ask. Is the grain of the packing sheets going across the cylinder. Also slip the lighter sheets in between the heavier ones. Also another question and I am only asking, because I have seen operators install the tail end of the blanket...
  12. R

    Speed master 52 packing slip

    Sounds unusual but anything is possible. You could try spraying oil on the packing sheets so that it will hug the blanket better, Make sure that you are set in the Zero position on the gauge on the operator side. This allows you to move the blanket ahead or back in the event that you are trying...
  13. R

    Inklings

    So that's where the term sheet-fed press came. Hmmm:confused:
  14. R

    Anicolor printing issues

    Is this the type of problem that you are having? See attached samples.
  15. R

    No Appreciation

    The CEO in your cartoon bears a striking resemblance to Paul Martin. Are you trying to make a political statement? LOL:rolleyes:
  16. R

    Installation of CP 2000

    I wondered why he was banned and now I know. I would not be surprised if Heidelberg lawyers have not been involved.
  17. R

    Bring Your Popcorn - Landa's Coming

    If blankets only last one week. I will apply for the rights to market and sell the Consumables. Cha Ching$$$$$ I will have to open a numbered Swiss bank account to handle all the money from Blanket purchases.
  18. R

    Printing long on one side

    From my past experiences in the field, I met shop owners that wouldn't let their operators adjust rollers much less let them have a go at what discountprinting has suggested. Alois is correct, the manufacturer should correct and stand by the product to resolve the situation. There are various...
  19. R

    Printing long on one side

    Stochastically speaking, should the dots be round or elliptical? Sorry I couldn't resist. I think it is time for me to go and find a paper stretcher and some color bars. Those who apprenticed in the good old days, and were had by their mentors will appreciate this.:D
  20. R

    Error 11-05, Printmaster 46-2, please help

    Well done sir. Congratulations on resolving the issue. Who finally nailed the problem? I know that these units should be constantly monitored and drained. I have heard of operators opening the valve as part of shut down procedures daily. The constant air escaping when you fire the press up in...

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

 
Back
Top