Search results

  1. G

    Manuals for yawa automatic die cutting machine

    Hello every one Good day to you, i was wondering if someone coudl have the manuals ( electical, assembly, operating, etc), for a yawa automatic die cutting machine and could share o sell to me please? The model im looking for is a MW1050 AI, Year 2002 And also to know if someone has spare...
  2. G

    Manroland 205E make-ready (2006) (CIP3+Techkon RS400)

    Hi congrats!!!!, for all the effort and time, i would like to know if you can share the info to see if its possible connect to this home made densitometer. i look in the web. (youtube, type "homemade automatic density measurement with x-rite dtp41") thank for all the time have a good day...
  3. G

    Agfa galileo vs error 0057 help needed please

    Hi thank you for all you for your help, im getting this error 0057 ("edge sensor never reads saturation") when i try to image a plate, the systems boots ok and everything seems to be in order, but then when a plate goes into the engine and tries to start the error shows, and stops everything...
  4. G

    Roland-6 color strip Needed PLEASE!!!!!!

    Hi All, I'm looking for Man Roland-6 color strip for 706 Machine i dont have the digital File so the CCI can read Roland-6 col strip Appreciate if any one can share with me. Email:[email protected] Happy holidays Thank you All.
  5. G

    Vaccum issue agfa galileo ctp vs, please help!!

    Hi Thank you for your help and time , i cleaned and reviewed the two metal probes that you told me , and we tried again,but with the same result. we opened one side of the platemanager ( with the service key put in on), and we sent another test, we saw that the picker device goes from the...
  6. G

    Vaccum issue agfa galileo ctp vs, please help!!

    Hi there i would like to know if someone knows how to solve this issue: my agfa galileo vs, shows me the error #1020, and says : "insuffient vaccum, after peel, open covers, remove plate from plate manager", "YOU MUST REBOOT TO CONTINUE" I've checked all the tubes and i alredy check the...
  7. G

    agfa print drive series 3 as a tiff catcher????

    hi i have an issue with my apogee printdrive series 3, with open connect, i have it connected to an agfa galileo vs8 ctp, the thing is that i don't know how to configure it so it could receive 1 bit tiff files that i send from the harlequin 9 i did a test in the printdrive using a input device...
  8. G

    Printdrive series 3 input device issue

    Hi selectset I have the same issue, when i send files from harlequin 9 to appogee series 3 update f, how did you solve it?, could you please tell me? best regards thanks a lot
  9. G

    AGFA PrintDrive

    hi i have an issue with my apogee printdrive series 3, with open connect, i have it connected to an agfa galileo vs8 ctp, the thing is that i don't know how to configure it so it could receive 1 bit tiff files that i send from the harlequin 9 i did a test in the printdrive using a input device...
  10. G

    error #1040, agfa galileo vs8 help please!!!

    Hi vlad sure, here they are, thank you for all!!!! best regards
  11. G

    error #1040, agfa galileo vs8 help please!!!

    hi there ow are you?, i don´t know if you can help me, i turned on the galileo, and i waited for all the systems to work, and once they did, i wanted to refill the plates, so i sent the command "move bins to loading door",but once i did, a message appeared, displaying an error number...
  12. G

    Voltage Regulator?? for ctp galileo vs

    hi vlad first of all thanks for all the support, and yes i used "move bin to load door", and when i did it, the error #1040 appeared, then i reboot the galileo the message appear again, i have the plate manager have a merry christmas
  13. G

    Voltage Regulator?? for ctp galileo vs

    how are you?, i don´t know if you can help me once again please, i turned on the galileo, and i waited for all the systems to work, and once they did, i wanted to refill the plates, so i sent the command,but once i did, a message appeared, displaying an error number: 1040, "shutter motor or...
  14. G

    Interface Card?? for Gaileo CTP VS

    I don´t have the board to connect it, so i´m looking for the board, and someone is selling me one, but he says that he has two of them 209733-901b, or 209733-952a , but i don´t know which one works i apologize for too many questions, i´m new on this, sorry, i´,m thankful to you because...
  15. G

    Interface Card?? for Gaileo CTP VS

    Hi vlad, it would be for the printdrive, there is someone who is selling me an upac apis card, 209733-901b, or 209733-952a coud you help me telling me wich one could work? thanks a lot
  16. G

    Interface Card?? for Gaileo CTP VS

    No, not yet
  17. G

    Voltage Regulator?? for ctp galileo vs

    Ok thanks vlad it is really helpfull, thanks, i will do the math, because i would like to connect all the devices in one stabilizer, like you mention, and i wouldn´t like to damage the whole galileo for example: plate maganer: 10 amps the lp 82 ultra: 15 amps total= 25 amps so 25 x 220 x...
  18. G

    Interface Card?? for Gaileo CTP VS

    Thank you vlad, well i don´t have the upac apis board, because when i bought it it did not came with it, but i will try connecting the hq rip board direct to the galileo output, i will let you know if it worked thanks a lot, i appreciate it
  19. G

    Voltage Regulator?? for ctp galileo vs

    Hello everybody i have recently bought a used ctp agfa galileo vs, with the plate manager, but i was wondering if i can plug it directly to the power supply, because i don´t want to make any damage to the ctp, so i was thinking, that it would be better if i plug it first to a voltage regulator...
  20. G

    Interface Card?? for Gaileo CTP VS

    Hello everybody I do have the same issue, i bought a ctp galileo vs with the plate manager, but it did not come with the apis card, the difference is that i have harlequin 9, the print drive, the dongle and the cables, do you think you can sell one to me too?, and if the apis card, will be...

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

 
Back
Top