Search results

  1. S

    Epson 9880 printing too short

    The problem was due to a support bracket on the feed bar wearing down & the bar bending when it has tension on it, meaning that it feeds paper at different rates from right to left. It is adjustable but requires a big strip down to get to it. I had to adjust it to it's max so not sure how long...
  2. S

    Epson adjustment wizard 2 needed urgently

    I have an Epson 9880 with feed & possibly skew issues but I need the adjustment wizard software to run the checks & adjust if needed. I can't use the printer at the moment so could really do with some help getting the software. Thanks in advance
  3. S

    Epson 9880 printing too short

    Not using a RIP, printing directly from Photoshop using the Epson driver for Mac. As far as I can tell both printers/drivers are set exactly the same.
  4. S

    Epson 9880 printing too short

    I've got two 9880's and the length of the prints on one printer are too short. If I print say an 800mm image on one then it comes out 800mm long but if I print on the other it comes out about 795mm & banding can be seen on the image. Not only that but if I measure the image side to side there is...
  5. S

    Epson 9880 head randomly clogs

    Hi We have two Epson 9880 44" printers & one of them has a problem in that the head randomly clogs. The strange thing is that it will be printing fine then about 1cm into a print, one of the colour's partially blocks. Normally running a head check on the printer sorts it out but it's becoming...

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.

Learn how…….

 
Back
Top