Search results

clean your laser glass.

My 6136 seems very reliable, one PM can last at least 1 million( maintenance counter) without any service. I have owned the machine for 2 years with 2 million clicks, only replaced the fuser roller once... we clean the toner residue on the fuser claw every day, and never run anything above...

I have Konica 6136 and Ricoh 8200, 8300 is almost the same as the 8200, just with a larger screen and an easier to rebuild fuser. Ricoh has better image quality, almost as good as color machines, it is designed like a color machine, but with one drum. output is much flatter and lower static...

both machines print good quality, however, there are a few things I dislike about my Konica 1 duplex unit, the inverter unit is right beside the fuser, so the paper has to turn 90 degrees before exiting the fuser, which causes a lot of jams. the machine only has 3 million clicks, but 300 jams...

That's the price you import directly from the original manufacturer from China, all brand new. Saga has plugins for ai, cdr. The paid option software is developed by Intec I think. The one you have was about 5k which isn't too bad, 300%markup is normal for these rebranded machines. I just can't...

That's insane, it is a saga ASF420 rebrand. I was offered a little over 10k USD directly from the Alibaba reseller last year, I bought an iecho PK from them for 7.8k USD.

I did not get any problems when I switched toner, but my c7100 never gave me consistent color, regardless of what kind of toner I was using.

yes, they are. I had c7100, my dealer mailed me 9100 or 7200 toner by mistake many times, I just did not bother to ask them to replace it, the bottle rotation gear comes off easily, never had any issues.

in some cases, the color will shift during the ink curing too, so it could be the poster you did earlier has shiftted color. so you might wanna wait for 24 hours till the ink is fully out gassed, then compare

yes, this is what they told me to do, I could get better red, but M cast on halftone. they made some improvements after the 100th machine, different drums, if your serial no. is before AC0D011000100 , then we are in the same boat.

I can get nice solid red from my Ricoh. The problem with Konica is the max density is auto adjusted by the machine which is not dark enough for red, I can tweak a little bit to get better red, but it just isn't worth the time since I have other machines print well Does c7100 print glossy...

I have a c12000, not the best machine that I owned, few issues that I have, not fusing cardstock at rated speed, thin vertical lines during the print, red prints like orange no matter how we profile it, their "20 years experience color expert" told me to increst max density+3 after...

depending on what kind of flap you have, some flaps will be opened by the front separation air and will cause jam, so you have to block the holes on the flap side. you can use the konica part A4F2626001 , or just tape them.

make sure the die setting is correct, or you might need to recalibrate the fold position in service mode, I think the password is 1974. make sure to mark down the value, before you change anything.

hmm, you will never get consist fold position for anything under 11pt, if you use the regular die. unlike the older digifold, XL does not have the option to adjust the fold position individually, so the knife fold is always folded at the creasing line. how far off is your narrow creaser? I...

we have the same machine, make sure you have the narrow creasing matrix for 100lb text, otherwise you will get inconsistent folding position. yes, feed text weight paper can be a little tricky if the paper is not laid flat or too static, what I do is increase the side air and put weight on the...

you can increase the capacity in 0663 adjustment settings for operators. the default setting is based on the paper weight and size, 200 sheets of the 13x19 cover are about what I am getting too. for the jam issue, since you have the plockmatic finisher, so the finisher output tray is...

you can buy it from hytec , they have it in stock. no need to be a dealer, they sell to everyone.

what about the roller pressure? we use 230f, 3 fpm, and 60psi on regular adhesive soft touch film, works fine,printer is konica or ricoh, I think 275 degrees might be high, it can distort the film too much at low speed.

you can select toner save mode for Ricoh machines. no visual difference for most of the jobs. Ricoh has @remote problem which will monitor the supplies usage and send the toner automatically, no need to order.