Search results

Hello Looking to buy 2 used but low hours laser diodes for Agfa Avalon N8-50 / PlateRite 8800III machine. LDL and LDU If anyone has to offer, please let me know.

Hi everyone Client has old Agfa 8800MKIII that had tons of issue. Previous owner used machine for 12 years straight. After fixing both LD driver boards, power supplies, cleaning all optics and calibrating all motors etc... Machine works and prints well on positive plates (Agfa Elite pro...

Hi Looking for the service manual to the c.p bourg booklet maker and sheet feeder. Machine is experiencing strange communication issues between modules. Maybe someone can help. https://www.upload.ee/image/14172695/IMG_20220526_090936.jpg

Selling Agfa Avalon VLF micro chassis PCB's, power supplies, motion chassis drives and more. All taken from working unit, tested before decommissioning. List of parts: * CPU PCB (2pcs.) CG+0033740502 * Rotary servo board (2pcs.) CG+0033760501 * Linear Servo board (2pcs.) CG+0033770501 * SDX...

Hi everyone Got a question about the laser power supply board from an Avalon VLF (60 XXT): the board is controlled by the pelvis board, same that controls the GLV. There is only a 4 pin header connector (J1) between the pelvis board and the laser power supply that sets the laser current and...

Got a problem with an avalon n8-50, error E711d: "When the clamp is out, some tail clamps are detected on the clamp arm, or when the clamp is got, some tail clamps are not detected on the clamp arm" After the plate's been recorded the clamp arm lifts all the clamps off the drum, then the alarm...

Hello everyone Does someone have and could share the user and service manual for elantrix 125 sx OLP?

Perhaps someone has ran in to such an issue before. We had more problems popping out of our VLF 60XXT. Starting with the LR conveyor failing to work in automatic. Now just get the beeper and light indicator with a message to manually remove the plate. Yet works from Unidiag, every command...

We have an Avalon VLF 60 TFS that has a blue banding problem. Blue lines (about 7 microns thick) 3.80mm apart are appearing on 16mil plates, vertically along the drum. Something that doesn't happen to any other plate that's 12mil. ​​​​​​I already tried to adjust the belt driven stepper motor...

We have an Avalon VLF 60XXT CTP that has an autofocus problem. On OCT it's : Imaging: Autofocus controller fault Error C0=53030580 C1=00000066 when autofocus starts: write af:: ss_cnt= 1, onplt_cnt=81, offplt_cnt=0, res_pos = 169 Now i know that if ss_cnt is 0 or 1 that means that it's a...

Hello Perhaps anyone can help us, recently our Avalon's been giving us an error: S0A40 (online processor fault). See photo: http://www.upload.ee/image/9805170/IMG_20190408_190916.jpg Can anyone explain what this error is and possible causes?