Search results

  1. Ynot_UK

    C6 envelopes on KM PF-707m paper deck

    We have been asked to print C6 (114mm x 162mm) gummed envelopes which must have a diamond flap as opposed to a pocket flap. The PF-707m shortest substrate length is 139.7mm, exceeding than the 114m short edge of the C6 envelope, so if we are going to do this, the envelope is going to have to...
  2. Ynot_UK

    Ivory Fleck Card 260GSM

    A customer has asked us for this 260GSM Recycled Ivory Fleck Card, which is available at various consumer Arts & Crafts stockists in A4, however we are looking for either this or something comparable from a UK merchant/trade supplier in SRA3. Our merchant (Premier Paper Group) have offered...
  3. Ynot_UK

    Digital Recycled / Speciality Stocks

    To date, our typical work has mostly been using regular coated white stocks and uncoated stocks, white and tints and occasionally synthetics. We have a new customer for cards & notelets who only wants recycled substrates and likes 'Arts & Crafts'/Rustic papers like Ivory Flecked, etc. I have...
  4. Ynot_UK

    KM Pro 951 Output Irregularity

    Our Pro951 has a PF-706 paper deck and FS-532 finisher. Printing on A3 80GSM Navigator - the same substrate we always use and run circa 80k sides each month. All new wraps opened & loaded today, from the same pallet of paper. The job is output to the main tray, with no finishing, no...
  5. Ynot_UK

    Duplo DBM150

    Does anyone know how to display the meter reading on the DBM150 booklet maker?
  6. Ynot_UK

    KM C4080 toner flaking issue on solids on leading edge

    As attached photo - when printing on heavy stocks (300GSM and above) we've started getting flaking of solids on the leading edge (affecting as far as 12mm in from the edge) It doesn't appear to be drum related, as it doesn't happen on light stocks, not is it colour related. Our regular tech is...
  7. Ynot_UK

    NEW: Konica Minolta 2100 B/W

    Replaces the 1100 US PR UK PR
  8. Ynot_UK

    KM PI-502 won't insert after last printed page

    We recently installed a PI-502 on our B/W Pro951, to insert colour pages produced on the C4080. The unit will insert sheets from PI Trays 1 and 2 before the first page, after a printed page if there is another printed page to follow, but not after the last printed page. We've tried using 'Cover...
  9. Ynot_UK

    Post Inserting (KM Pro951)

    We don't have the PI-502 Post Inserter on our Pro951, however the driver facilitates inserting blank sheet/s after specified pages, from a paper tray (pre-engine). I have used this occasionally for inserting tinted slip sheets between sets. IIRC it doesn't count as a click. Any thoughts on...
  10. Ynot_UK

    Guillotining Laminated Stocks

    We have an Ideal 4850-95EP and on the last couple of jobs an issue had developed when cutting 250GSM silk with a gloss laminate to both sides. I've been trying to look at what's different to before and have come up with these variables, the third of which seems the most likely. the blade was...
  11. Ynot_UK

    New Konica Minolta C7100 series

    KM announces new mid-range AccurioPress models: Printweek KM (EU site)
  12. Ynot_UK

    GBC Magnapunch - Dieset compatibility between models

    We have a couple of Magnapunch 1's and a good collection of die-sets, covering all the popular finishing options we're ever asked for. My understanding was these original Magnapunch dies only fit the MP1, however talking with an engineer yesterday (not a GBC guy, but well versed on all the...
  13. Ynot_UK

    KM Pro951 PS Driver - 'Stamp' tab

    I'm looking at numbering several thousand of a single page PDF B/W form. We have the KM Pro951 with 1250/1052 PS driver (v.5.0.663) Whilst I can do this in Indesign and give the machine a 3,000 page PDF, I'm exploring the potentially much simpler way of adding numbering within the post script...
  14. Ynot_UK

    AccurioPro Print Manager

    Wondering if anyone has come across this issue (our dealer is on the case but awaiting response from KM dept. on festive break) hence after a quick fix. This is on our new C4080 with IC-609 controller, although I imagine the principle is the same on the last generation machines. Within...
  15. Ynot_UK

    KM Pro 951 - self adhesive labels - corners creasing intermittently

    Does anyone have any thoughts on this? The stock is standard self adhesive office grade laser labels, fed face up from Tray 4 on the PF-706 deck and output face up on the FS-532 for the straightest path. The scenario is as below and happens regularly with this repeat job. Requested 10 sets...
  16. Ynot_UK

    Konica Minolta AccurioPress C4080 / C4070 / C4065

    Looks like these are imminent, with EFI and Energy Star quick off the mark, in advance of a KM press release. A reliable source mentioned had it not been for Covid, the 40nn series machines would have been launched earlier this year.
  17. Ynot_UK

    Graphtec F-Mark Sheet Fed Cutter

    We are looking into buying one of these, obviously after doing some tests with our own work and substrates. Has anyone got one and can give some feedback after used it for some months? The cutter would predominantly be used for kiss cutting laser film and die cutting coated stocks. Also, for a...
  18. Ynot_UK

    Digital Press Conundrum

    Hi all - just signed up and this is my first post, although I've been lurking in the wings for months and have spent many hours reading - predominantly the Digital Printing and Binding/Finishing forums. Our situation - for years we have had machines from the KM Bizhub 'office' range - currently...

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

 
Back
Top