PrintingFools
Well-known member
We have always had Challenge brand cutters .
But we need a new cutter. We were using a 305 Challenge Champion.
The Microcut is not working , so we used it without, then after a few years the motor gave-out.
So, we figured on getting a new cutter.
I have never heard of these...But they seem to good to be true.
EBM 19 PLC2 19.1" Electric Industrial Programmable Paper Cutter
We cut a sheet size of 13 X 19 | 350 GSM most of the time.
Thanks for your advice, B
But we need a new cutter. We were using a 305 Challenge Champion.
The Microcut is not working , so we used it without, then after a few years the motor gave-out.
So, we figured on getting a new cutter.
I have never heard of these...But they seem to good to be true.
EBM 19 PLC2 19.1" Electric Industrial Programmable Paper Cutter
We cut a sheet size of 13 X 19 | 350 GSM most of the time.
Thanks for your advice, B