Duplo DBM-120

nprint

Member
Good Evening Everyone, I have a DBM-120 trying to saddle stitch a 8.5x11 booklet to 5.5x8.5
it folds but wont staple for some reason even though i have it set to booklet. im sure its a stupid setting i am missing, any help would be greatly appreciated
 

Stickman42

Well-known member
It's been a while since I ran one, but from memory...
Is the set staying in the stapling area for a second or so before the folding plate pushes it upwards into the fold rollers? If so, maybe something mechanical is keeping the staple bar from coming down to drive the staples out of the cartridges. If the set hits the stop plate but then almost immediately gets pushed up to the fold rollers, I would think it's an electronic/software issue.
 

sidneykidney

Well-known member
Good Evening Everyone, I have a DBM-120 trying to saddle stitch a 8.5x11 booklet to 5.5x8.5
it folds but wont staple for some reason even though i have it set to booklet. im sure its a stupid setting i am missing, any help would be greatly appreciated
When you feed the sheets into the machine, do the staple heads push down onto the sheets as though they are stapling.
 

Canon Research

Canon
Navigating the New Customer Landscape
Enhancing the Print Customer Connection (Part 3)

Read All About It

   
Top