Dynastrip Creep setting

Lammy

Well-known member
When defining creep , if I choose paper thickness where does it get that number from? The JDF settings? There were some equations in the manual that I quite didn't understand if there were for how to figure the maximum or were showing you how to figure paper thickness? Then again it was late and I hadn't been drinking so that could have added to my confusion. ;)

_______
Lammy

EPP Manager • Brass City Printery
OSX 10.4.10 • RAMpage 9.4 • Dynastrip 4.2
EFI Colorproof XF • Avantra 30 • Epson 7600

Edited by: Lammy on Sep 7, 2007 1:42 PM
 

jcallison

Member
Re: Dynastrip Creep setting

Our job planners find out from the paper company the caliper of the paper. It's usually some number like .0039". That is what we put in for paper thickness. Dynastrip does the math and push-ins based on that.
 

Lammy

Well-known member
Re: Dynastrip Creep setting

Jennifer where do you put the number in? in the JDF info or in the number box next to the paper thickness radio button?
__________________
Lammy

EPP Manager • Brass City Printery
OSX 10.4.10 • RAMpage 9.4 • Dynastrip 4.2
EFI Colorproof XF • Avantra 30 • Epson 7600
 

jcallison

Member
Re: Dynastrip Creep setting

We aren't using too many JDF impo's yet. In Dynastrip, we go to Job Definition/Definition/Pagination Seq. Def./ click Paper Thickness and enter the caliper and push-in button. I hope this helps.
 

So You Want to Invest In Inkjet

I Want to Invest in Inkjet, But…
Over the past few years I’ve watched a group of transactional and direct mail printers strategically shift from monochrome toner machines to full-color toner and inkjet presses. Most banished old black-only toner boxes but kept their color toner devices around because they anticipated needing both color inkjet and toner presses to meet customer needs. They were right then and continue to be right today. Because toner and inkjet can be better together. Read the Post

   
Top