For replacing feeder belts on printing and bindery equipment.
Included in the kit is the heated belt press, one bottle of unopened adhesive and one half full bottle of adhesive.
(1) unopened 1.5oz of adhesive 118N included.
(1) plastic container is half full of fixol.
(1) original instruction sheet for using the belt press in German, English, French, and a couple other languages i'm not familiar with.
(1) application brush (and a few misc lengths of feeder tape)
(1) Mabeg Hot-pressing device PT-103 S
$450 and I'll included the Durometer and case.
Contact [email protected]
For best results you should scribe the ends of the belts before assembly. Scribe tool is NOT included in this package.
Included in the kit is the heated belt press, one bottle of unopened adhesive and one half full bottle of adhesive.
(1) unopened 1.5oz of adhesive 118N included.
(1) plastic container is half full of fixol.
(1) original instruction sheet for using the belt press in German, English, French, and a couple other languages i'm not familiar with.
(1) application brush (and a few misc lengths of feeder tape)
(1) Mabeg Hot-pressing device PT-103 S
$450 and I'll included the Durometer and case.
Contact [email protected]
For best results you should scribe the ends of the belts before assembly. Scribe tool is NOT included in this package.
