Fenimore CycloMag 720

Heather1234

New member
Good Afternoon!
Does anyone have any experience with the Fenimore CycloMag 720? We recently purchased a second hand machine (pretty old but the price was right) in a private party sale. It came with no documentation or instruction. We were able to obtain a copy of the manual from the manufacturer but it was pretty vague. We got it installed and running, it feeds fine and we were successful at achieving a die cut.

The trouble began when we tried a pocket folder, the scores cut and the cuts did not come through the sheet. We thought perhaps the die was faulty so we sent it back to the diemaker with the problematic sheets and they made us a new die. We then went back to the owners manual and followed the set up procedure to the letter to ensure we were not applying the incorrect amount of pressure. We got the same result with the second die.

We have been looking for a retired operator or someone that could give us some guidance to what we may be doing wrong.
Any advice would be appreciated.
 
Hi, I think 65 miles from my shop someone have a insignia 7, is almost the same press, is near san diego california, if you dont get ir solved, do you sell the press? looking to buy one of that, send pictures of the problem
thanks
 

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

   
Back
Top