GMCE Boot Stuck in Gboot mode

rajmila

Member
Hi,

There is error while booting Trendsetter 800 IV. service shell error shows no communication with the BOOTP Server...... and I can see only Gboot mode only. I've checked Gmce network status -OK, Tried Host configuration -SUCCESS, try to load CR but fails to load GMCE Firmware. checked Power Supply voltage - OK.
Please check some snaps related to error.
It would be great if anybody help me in this issue.
Thanks,
 

Attachments

  • WhatsApp Image 2022-08-10 at 2.03.26 PM.jpeg
    WhatsApp Image 2022-08-10 at 2.03.26 PM.jpeg
    145.7 KB · Views: 185
  • WhatsApp Image 2022-08-10 at 1.56.39 PM (1).jpeg
    WhatsApp Image 2022-08-10 at 1.56.39 PM (1).jpeg
    87.1 KB · Views: 176
Hi,

There is error while booting Trendsetter 800 IV. service shell error shows no communication with the BOOTP Server...... and I can see only Gboot mode only. I've checked Gmce network status -OK, Tried Host configuration -SUCCESS, try to load CR but fails to load GMCE Firmware. checked Power Supply voltage - OK.
Please check some snaps related to error.
It would be great if anybody help me in this issue.
Thanks,
Try replacing the RJ 45 communication cable.
 

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

   
Back
Top