Intended Press Curve - Gracol

barryk

Member
I am running a Xitron Harlequin rip.

Under page setup there is a drop down to select the intended press. There are some generic ones for SWOP, Commercial A, some fogra etc.

I have been using my own custom curve for awhile but I wanted to see if there are any curves for Gracol that I could drop in or import.

Any such thing I could use? Or does someone have a Gracol dot gain file/drawing that I could copy?

thanks
 

danremaley

Well-known member
I am running a Xitron Harlequin rip.

Under page setup there is a drop down to select the intended press. There are some generic ones for SWOP, Commercial A, some fogra etc.

I have been using my own custom curve for awhile but I wanted to see if there are any curves for Gracol that I could drop in or import.

Any such thing I could use? Or does someone have a Gracol dot gain file/drawing that I could copy?

thanks
Send me an email and I’ll send you the “wanted” dot area numbers!
Danremaley@comcast.net
 

So You Want to Invest In Inkjet

I Want to Invest in Inkjet, But…
Over the past few years I’ve watched a group of transactional and direct mail printers strategically shift from monochrome toner machines to full-color toner and inkjet presses. Most banished old black-only toner boxes but kept their color toner devices around because they anticipated needing both color inkjet and toner presses to meet customer needs. They were right then and continue to be right today. Because toner and inkjet can be better together. Read the Post

   
Top