OCE Arizona Double sided printing

slush11

Well-known member
Hi!
Doesn anyone have experience printing double sided substrates such as coro, sintra, etc... on their flatbed? I feel like I've tried everything and I'm usually successful in lining up one direction, but never both. HELP!
 

suess

Active member
We have had similar issues with double sided coro, sintra, or catapaque. In my experience I line up the media on the table rulers. print first side, then use a regular ruler and mark out the edges on the 48 in corner, and do the same on the opposite end leaving a mark on the table, mark the media. then flip and line up the marks.
Tolerance ends up being with in a 1/16th. Also in doing this we have our art department increase bleed as 1/8th is usually no enough. I can take pictures later and upload.
 

Print In the Eye of the Buyer

Canon White Paper
FIVE PART SERIES:
FREE DOWNLOADS

Print In the
Eye of the Buyer

Download Free White
Papers Here

   
Top