Perfecta 115 UC Help required

My perfecta 115 UC guillotine displays "Error - 45 Programme Memory" error when I press the program button for selecting the cutting program. Rest of the functions are normal, I could use the machine manually - without program functions.

No reference to Error 45 in the machine manual.

Request help from this community. Thanks in Advance.

RV
 

AndreyZ

Member
Hello
How do you solve the problem with the error "Error - 45 Program Memory"?
We have the same problem. Programs are selected manually
 

chock

Well-known member
Hi Sir:
I hope your are well in union with his family
Saw you have a problem with Perfecta Paper Cutter
Normally the error 45 is problem with the sensors B 81down or B 82up
Non Repeat Devide are ON at the same Time.
Please Do not hesitate to contact me, if you need additional information.
Please look for your Schematic Diagrams
Regards
superchock@yandex.com
 

mujahid

New member
Hi Sir:
I hope your are well in union with his family
Saw you have a problem with Perfecta Paper Cutter
Normally the error 45 is problem with the sensors B 81down or B 82up
Non Repeat Devide are ON at the same Time.
Please Do not hesitate to contact me, if you need additional information.
Please look for your Schematic Diagrams
Regards
superchock@yandex.com
Hi Sir
i need documentations for perfecta 115 TVC precisely service instructions manual i have error (please insert memory card!!)

mojahid2005@yahoo.com
Regards
 
Last edited:

Canon Research

Canon
Navigating the New Customer Landscape
Enhancing the Print Customer Connection (Part 3)

Read All About It

   
Top