We are experiencing an error on our film processor.
(GI ATB V03 LUTH)
Imagesetter = AVANTRA 44
Processor = AVANTRA 36/44 OLP
In the past we were able to turn on the processor and let it warm up, usually all day until the circuit board warmed up and it would clear itself. Now that doesn't work anymore. so I tried heating up the board with a hairdryer and that didn't work either.
I did some research online and came across the attached post. That post says we have a bad capacitor C613 on the main PCB.
I was just wondering anyone has had experience with this or could give further advice or help.
Thanks.
(GI ATB V03 LUTH)
Imagesetter = AVANTRA 44
Processor = AVANTRA 36/44 OLP
In the past we were able to turn on the processor and let it warm up, usually all day until the circuit board warmed up and it would clear itself. Now that doesn't work anymore. so I tried heating up the board with a hairdryer and that didn't work either.
I did some research online and came across the attached post. That post says we have a bad capacitor C613 on the main PCB.
I was just wondering anyone has had experience with this or could give further advice or help.
Thanks.