I run a Ryobi 3302M with Crestlines. We've had it a year, got it used, and it has always had a problem with laying ink down. We've changed every rubber roller, I use Ryobi blankets and under blankets. I have tried four different inks, Spinks, Superior, Kohl/Madden, VanSon's CML, and all print the same way. Under a loupe (often times without a loupe) you see white speckles. Presstek services the machine and they've had five different technicians work on it and failed to fix it. They say the press is at spec and it's a problem with the ink or the wooden floor I operate on. The thing is, this press replaced an older Ryobi 3302M with twice the impressions and we used the same ink, water, everything and didn't have this problem. If I over pack the blanket by about 8 mil, it prints pretty well, but they tell me I'll ruin the press by doing that. Three of them were here all day yesterday and today it prints worse than it did last week.