mojoprime
Well-known member
so, i'v e got a xerox 700 with the light production finisher and the c/z fold. the first thing that happened was that i was told it would fold coated paper. CED says no. then, that it would fold "our paper." our paper standard is a 105gsm sheet. according to the CED, this is too heavy -- you'd actually have to use a 24lb or lighter uncoated sheet to fold.
this is insane. the bleed-though on a sheet that thin pretty much rendered it useless for brochures with any sort of coverage.
so my question -- THOSE OF YOU WITH 700s: have you been able to fold (c/z) using the 700 on paper higher than 90gsm? if so, can you give me detailed instructions how you got it to work? if not, i'm going to tell xerox to come and get this part of the machine.
this is insane. the bleed-though on a sheet that thin pretty much rendered it useless for brochures with any sort of coverage.
so my question -- THOSE OF YOU WITH 700s: have you been able to fold (c/z) using the 700 on paper higher than 90gsm? if so, can you give me detailed instructions how you got it to work? if not, i'm going to tell xerox to come and get this part of the machine.