Search results

Looking to sell my Bizhub. Anyone know a company that resells copiers?

Had a transfer belt put in by a technician Friday. Now I am getting small dots repeating every 1.75". On an 11 x 17 sheet the dots are at 7.25" from the left and running the entire 17" side. I just put in a new black drum and 2 new color drums. In the service manual I found this for Bands...

I had a Xerox technician in to fix a jam on my finisher. He can't figure out what the problem is. It's jamming in the first section of the finisher. I printed a few single copies out without a jam and then when I tried printing 500 it jammed on the 1st copy. Any ideas?

My touch screen is off by about an inch. I followed the procedures to recalibrate it and when I use the stylus to touch the points I hear a beep on P1 and P3 only. I've done this 3 times and restarted. Any suggestions?

Black is printing very light. All other colors are solid. I replaced the black developer unit and developer about 100,000 copies ago. It started out with small black specks all over the sheets but black was still solid. I cleaned everything really good and then took out the developer unit to see...

A month ago my copier wouldn't duplex. Had a tech in and he found a small piece of plastic that was stuck in the bottom. When he removed it it worked fine. It happened again and he of course first looked to see if they was anything stuck in it again. He checked all of the connections and wiring...

I am getting streaks on all colors and a slight void line on the cyan. The black and yellow developer unit and developer were just changed. New drums, IBT belt and fuser. The windows were cleaned for the lasers which were really dirty. Any ideas besides cleaning the actual lasers?

I am getting fine black specs on non printing areas. Never seen this problem before. I replace the black drum. Any suggestions?