Standard Finishing
4Over

Announcement

Collapse
No announcement yet.

Brisque to Prinergy Evo

Collapse
Canon
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Brisque to Prinergy Evo

    **Brisque to Prinergy Evo**. Anyone out there made the switch that could give me the pros and cons? Since Kodak wont be supporting Brisque or the Iris 43Wide soon, I'm sure I'll have to switch to something else soon. I really like Presstouch post rip editing capabilities and Photoshop for editing CTs. Is this possible with Prinergy Evo?

  • #2
    Re: Brisque to Prinergy Evo

    Hi Phil

    Not sure about the press touch issue but for editing CTs in Photoshop you will be doing that from your PDF.
    As long as you have Acrobat Pro you can edit image and it will open up in photoshop.

    Only issue we have seen with this is that if you are using a Tablet and pen you have a
    good chance of moving the image....which can be BAD ! But other than that you should be all set.

    Unless you plan on Color Managing your files using Device Links, EVO is not capable in this area.
    If that is something your going to plan on doing you will need something like Alwan's Colors ColorHub
    or something similar !


    John

    Comment


    • #3
      Re: Brisque to Prinergy Evo

      Thanks for the reply John. Did you go from Brisque to Prinergy? If so was it an easy transition? How does Prinergy handle transparent images that rasterize type? Thanks again for tour input.

      Comment

      4OverStandard FinishingDuploSmartsoft (Presswise)AleyantCanonKBA
      Standard FinishingDuploAleyantCanonGraph Expo4 PeesLabelexpoKBAKBA4OverSmartsoft (Presswise)

      What's Going On

      Collapse

      There are currently 4265 users online. 85 members and 4180 guests.

      Most users ever online was 6,597 at 10:25 AM on 04-20-2018.

      Working...
      X