Recent content by Ann

  1. A

    Polar Mohr 76 EM error 69 and english manual

    Loosen the top hex bolt, and the two hex lock nuts, one each side. The 2 allen screws are the adjustments. They oppose each other, so by loosing one side and tightening the other, causes the fence to pivot. Use a large carpenter's square to get it real close. For micro adjust testing - cut a...
  2. A

    Polar Mohr 76 EM error 69 and english manual

    Glad to have been of help.I would have gladly have posted the manuals on this site but unfortunately they were too large.
  3. A

    Polar Mohr 76 EM error 69 and english manual

    I have an operators manual and spare parts manual not a service manual.
  4. A

    Polar Mohr 76 EM error 69 and english manual

    manuals do exist manuals do exist Hey digitalatsigonedotcom, The manual does exist.I scanned my manual but it is too large for me to post.I have tried several times to post it but keep getting an error. If you would please post your email address.I can send you pdfs of the manual and the parts...
  5. A

    Polar Mohr 76 EM error 69 and english manual

    You can download the manual from Polar 76em Manuals Downloadables
  6. A

    CREO Imposition

    I have been trying to remember this from when I ran the same machine.It has been a while.I remember that we had to play with imposition and even lie to the machine to get it to work. Don't always go by the diagram that shows whether the sheets will fit or not. When you are having problems while...
  7. A

    Polar 66 error code 603

    Hey this is all I have found so far. Polar 115x Error codes 603 & 608 - Heidelberg Repair Forums It appears to be a knife positioning error. I assume that turning it off and then back on again doesn't clear it. My old old 76 used to give me a problem that sounds like yours but no actual code...
  8. A

    Unable to make small cuts on Polar 76EM

    HPC is correct.Under the cutter bed against the base of the cutter is a ledge with a switch.After removing your false clamp plate you are supposed to rest the plate on that ledge which holds that switch down.You will then be able to make your cuts.
See more

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.

Learn how…….

 
Back
Top