Recent content by azehnali

I think I told you that weeks ago just get another fuser man

when you stopped the paper halfway through the fuser was half the image non fused? I would stop the sheet just as it enters the fuser then remove the paper and pull the ibt drawer out and see if you can see the marks on the ibt belt you will have to turn the belt counter clockwise to see the image

can you run a normal full color print and post the photo also do you know how to pull the ibt drawer out? also is the mark like toner is scrapping or like an indentation ?

those lines are from the fuser are you sure you changed the fuser belt assembly why dont you stop the paper half way into the fuser and check to see if the portion in the fuser has the lines

replace your fuser belt assembly

what direction are the lines running in the future its best to post the whole image ,which can explain the real problem

are you servicing the machine yourself?

hmmm

your volume is too high for just one printer you will need at least 3-4 midsize machines if you want basically zero maintenance all you will need to do is replace basic components with take 90 seconds on average to replace

if you think you can run those volumes on the machines that were listed you are dreaming most people on a versant 180 run 20K per month and on the 3100 50K a month I have over 100 versants on service and have been servicing print shops for 35 years do the math at 150 k per month it means the...

if you think you can run those volumes monthly you are dreaming

what gsm paper thats a lot of prints what machine are you currently running that kind of volume on

is the machine a newer model

you can always consider a remanufactured machine I sell them every week and put them on Xerox service

xerox 1000i is antique and xerox will not service it