Recent content by Chubb

We had been using KO inks and changed over to KI and we definitely are staying with the KI. Adhesion is no longer an issue and there really isn't that much of a color difference, there was more of a change in gloss it is really satin looking now. We had the same complaints that you have in...

Thanks for the reply.

We have accumulated a lot of waste ink over the years and we also have some old bags of Sericol KO inks after changing to KI inks. What the heck do I do with the old ink? We want to be environmentally conscious when getting rid of the waste inks. Does anyone one know who to call? Thanks, Chris

I have actually had pretty good success with a product called Chalk Talk. I was able to print directly on the substrate and it works great with fluorescent markers. I purchased the markers from staples. You can get the material from: Wensco Sign Supplies or get it from the manufacturer rtape |...

njwaverider thanks for the information! We were finally able to get a sellable product on one half of the table, the other half is so far out-of-wack fujifilm isn't sure what to do about it. Eventually they will have replaced about every part on the acuity lol. Thanks again everyone. Chris

Unfortunately, it turns out that the problem was with the flatbed. The frame of the machine was twisted during shipping and they are coming in this week to try and get it straightened out. Thanks for the reply!

Unfortunately we have no way to adjust the settings unless we had the "key" that the service guys have. The banding seems to be exactly where the different paths of ink touch each other. I have found that if the substrate is laminated the banding virtually disappears.

Hello Everyone, I am the Print Manager for Indoor Graphics in Chattanooga, Tennessee. I look forward to learning a lot from the people on this forum, looks like there is a lot of experience on this forum!

Hello everyone! We have had our FujiFilm Acuity Advanced for over a year and have tried numerous times to reduce banding in our prints. I have read some other posts saying to try unidirectional printing and it does reduce the banding but not much. The downside is that it takes longer to...