Recent content by cmac617

  1. C

    want a 3302 W Crestline

    Looking here in PA for a "GOOD' used 3302 crestline gotta have.. ideas?? Thx
  2. C

    press operator/printer

    Northern Chester Co PA marketing Co looking for 3304/4995 operator. Must have well rounded back round in press/finishing general all round position [email protected]
  3. C

    More Ryobi 3302 feed issues.

    add to that the buckle control...
  4. C

    More Ryobi 3302 feed issues.

    Q: grain direction on sheet?? static elim. working? speed?
  5. C

    AB Dick 9995

    3304/4995 original water system is not really something a button pusher (less exp. operator) should be fooling with. Much like the various systems that were add ons to get away from mollatons (sp) the original system is set up as an adjust at each start-up. Have watched several of the fore...
  6. C

    What's a really good 1 color press with roller coaster volume?

    my 2 cents...or maybe 3 have done the small shop env equip 360's 975 etc 3302 is by far the better bet even if you want SOLIDs there is a "ghost buster" roller that can be added in the clean-up tray position...have done 4/c work with every good "pleasing color" results on these...all in all even...
  7. C

    Small Press Wash?

    vent your work area
  8. C

    Small Press Wash?

    Have used the V120 half and half w/ water as a #2 and #3 step with Varn Step one to start for years...easy on rollers and good "color pull"
  9. C

    Random spots showing up

    Been in the ink/paper biz since 60's....small little dupilcators to 6/c wide format...have seen/heard this lament before. #1 check water systems...any contamination from wash-ups or paper dust collecting or fungus growing in the system causes water to carry particles to ink/water ductors to...
  10. C

    So,what are hobbies away from work???

    what do I do after work ...huh what do I do after work ...huh been in the print industry since 65'...to keep the few strands of hair still on my head I am a paint thrower...have a degree in Art and print to pay for colleges...weddings...life in general. My stuff ( pint on canvas) is usually...
  11. C

    Running Envelopes on a Ryobi 3302M, How?

    been on and off a 3302 for 15yrs...env area bit of a setup prob...but once they are ready they go all day long
  12. C

    water system parts avail. for 4495

    just finished a refit of our ABD 4995...to a crestline system have all the parts from orign. Ryobimatic system...' safety covers motors wipers and 3 roller water system X 4 any ideas as to what this stuff is worth ??
  13. C

    laminator needed..have any used dealers out there

    just had our 27" lam. die need vendor for used..chesp..replacement
  14. C

    Ryobi 3404DI Registration Off between towers

    We have a 4995 AB Dick model and had similar prob...Not sure as to where you are but our independent press tech worked magic...He is John Max out of Elizabethtown PA need more info let me know Carl
  15. C

    air tech

    looking to replace parts on air tech IR powder unit...air tech went under so any ideas as far as suppliers thx Mac
See more

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.

Learn how…….

 
Back
Top