Recent content by color_matters

I agree on the use of a standard USB Microscope, it's much cheaper and does the job.

How about trying a head alignment, just set all the necessary settings when doing head alignment like the thickness of the paper and so on.. also do a feed adjustment if necessary. I used to print positive films using EFI Dot Creator and it's very hard to find a decent setting that does not have...

i think you can install it to different machines just try it

What i mean by not letting it drag is to not let the feeder pull the film from the roll, leave an allowance to the roll of film equal to or more to what you are going to print, or try to print in sheets, cut the desired size and try from there

Try this, print it per sheet, cut the film to your desired size. If that's a big bother, if you're printing in rolls, be sure that you have enough allowance for the film, never let it drag

Do you have to do head alignment on the whole length of the printer or a simple A4 size will do just fine?

I too agree The Imp is awesome. To tell you frankly i'm looking forward with his every scene, makes me wonder what he is plotting next.

Elvin, may i suggest something for your plate curing unit, this is just a suggestion feel free to try it, i saw a turbo oven yesterday and made me think of how that generates certain amount of heat and has a timer, why now used that, it sound a little funny but you see my point right? to even...

Very interesting topic, this worked very with us up until now, the procedure is almost the same the only difference is that we are using an "Inkjet CTP Plate" (a PS plate which has a special coating) which is receptive to inkjet inks, we then use Photo Black ink only to print on the plates after...

is your iOne connected via usb? i think that happened with me sometime ago, try transferring the cable to another usb slot, that worked for me, if this doesn't solve it might be another issue

Hello, Printing on substrate that is not inkjet coated will give you such results, however try using plain paper setting and try to adjust the time for the printer to print the next line to give drying time on the inks. If that doesn't work I found a link that I think would help you, its a...

joan2011, Please have a look at these two threads, you might find answers or ideas here. http://printplanet.com/forums/computer-plate/15768-polijet http://printplanet.com/forums/computer-plate/19645-tango-dotworks-should-g-j-concerned Regarding the question of there are other printers...

I have come across this blog by Gordon Pritchard hope it helps. The Print Guide: Ink Sequence

you can find almost everything you need to know below Quality In Print by Gordon Pritchard

hmmmm... that is weird, I've heard of concentric dots but those dots are cenrtainly weird you can find more info on concentric dots at this link Signature Offset :: High Definition Printing