Recent content by ctptech

To be honest I didn’t check the servo . I did consider it and told the customer it was a possibility and due to the price of the servos I think he’ll struggle on . I’ll check it next time I’m there and let you know . Thanks maxon

Hi .ive checked the blocks and they’re fine in balance test .the numbers are ok .i had a 4300 last month where the blocks were slipping and had to replaced 2 retaining rings . This cured the errors but this fault is different . I’m worried that it’s the drum bearings . They’re not in the parts...

Can Anyone help me please. I have a screen 4100 that vibrates when the drum spins up .it sounds horrible and affects the image . It’s better when drum speed is reduced but still there . The belt has been changed as the balance blocks and clamps . It rotates smoothly by hand . No errors ...

Hi All . Had a customer contact me about this error . Is it an engine to rip issue . Don’t know too much about the dimensions 400 .i Can’t locate a service manual for one in the uk . I used to work for Abdick back in the day but don’t know anyone from Presstek or mark Andy now as they’re all...

Does it think it’s completed the plate . Is the spinner carriage moving across the plate . It’s unusual as normally when they fail it’s a silver plate or extra long 550mm reset plate . Are there any errors ? . It’s possible it could be the laser diode on all the time. If you double click the job...

Mitsubishi are selling a poly ctp called the Dpx Fredia . It’s supplied brand new and with warranty.

Apparently it’s all the customers So I’ve been told , Doesn’t seem to affect screen machines only Presstek users say it’s a problem

Hi Ronnie . I have looked through those but like you said there’s nothing on focus. There doesn’t seem to be much on the web about the dimension servicing .

Hi Ronnie . It’s a Presstek dimension 400 . I don’t know how to adjust the focus and apparently there are no engineers left as they’re have all retired so I’m trying to help a few desperate customers.

Hi sorry, its the focus which needs a tweek.

Hello friends. I recently came to a problem where the Fuji .15 plates are actually .143. This seems to be causing a quality issue on Presstek dimension 400’s . The .3 are ok and so I’ve been told they do not do a .2 anymore. Fuji said the issue can be rectified by focusing the ctp . Do any of...

never heard of white poly plates . what's the setter?: on black polys its usually a chemistry issue but ive also seen paper cause picture framing especially cheap stock . check you fount ph . black polys are between 5 and 5.5 ., I've also seen cylinder pressure cause an issue but that wouldn't...

dpx system or dpx2 .ive got loads of users. perfect for printmaster 505 x 340 with punching.

That would be great if you could Thankyou

Hi Ronnie. That’s great .just what I was looking for . Thankyou very much .