Recent content by DevostD

Interesting. I'd love to hear more about this. We're in Ontario and running a Versant 280 from Xerox. Competing dealer is at the door pushing Fuji and Ricoh.

If we were to buy out the lease we'd be looking at a metered supplies and service contract with Xerox. I thought that the Fuji SC180 was the successor to the Versant 280 but will have to now dive into this further. I will have to take a closer look at the Proficio PX300 as you mentioned...

Do you have any experience with the Fuji or Richoh presses?

Competing salesman stopping buy to pitch new lease Fuji SC180/SC285 or RICOH Pro C5400S. I'm being told the Fuji SC180 is the equivalent to the Versant 280, is this correct? We currently run the Versant 280 with very little issue and lease (from Xerox) is coming up soon. Debating to buyout the...

Same...

All interesting as we have a Versant 280 in-house and the previously Xerox... now a new Fuji dealer in town is knocking at the door begging for us to 'look at their new showroom production unit'.

UPDATE: Got connected with Xerox Production Second Level support and he did a remote connect. Upgraded the device system software version from v81.1.31 to the latest public published version v81.31.81. This fixed the issue and allowed me to perform a 2-sided 12x9 alignment. The one slight...

Agreed with all this, 100%. I keep telling my boss this too. Unfortunately in the market we're in Canva is a new reality so we have to modify to support it as best we can. Otherwise, say no equals lost revenue.

Your timing is impeccable, I just received my invoice from Canva after doing a 30 day demo for a "Pro" account. I'm starting to see a lot of clients submitting poorly created PDFs (via Canva) and have found it easier (so far) to access their Canva files directly, copying and editing in the app...

I set up the paper size as a custom size and saved to the preset

70lb, uncoated 104 gsm, but good idea to question the gsm.

Me too... and weird right? Also, love your signature "Certified CANVA hater since 2020" One additional thought, I'm picking up the sheet from Tray 1 but am now wondering if I should be using the HighCap... what tray are you loading your paper into for this 12x9 sheet size?

I've decided to set up a 12x9" custom page size on our Versant 280 so that I can print and saddle-stitch a finished 5.5x8.5"_full-bleed booklet with the online finisher. I set up a custom preset page size fine and was going to set up auto alignment with SIQA and discovered that the device will...

Wow. It will be interesting to see what Xerox comes back with then, albeit we're pretty convinced we'll buy the 280 out. It does everything we need.

To buy out or clicks charge?