Recent content by Erniek

One other area that I do not see mentioned in these posts has to do with efficiency and accountability. I started in printing with a clear set of objectives and production targets. I knew where I was going and could define my pathway by that. Today there is no solid ground to run on. Many talk...

C7000 color C7000 color We have a C7000 and the color does tend to change the longer a copy run is. Color consistency is in the ballpark at best on this machine. Surprisingly our 6500 tends to hold color better than the 7000. I calibrate to the paper I am running usually and them adjust color...

I would like to hear your impressions as well. We have had a 7000 for a little over a year and are having issues with banding that KM has not been able to resolve satisfactorily through KM service.

Would acrobat settings cause banding issues?

Does anyone with a C7000 have any recurring color banding issues? We have a 6500 as well and it has the banding problem but after 5years we have been able to work with it acceptably. But with the 7000 we were told that the banding problems were not an issue any longer but in practice this has...

Sometimes turning the air completely off helps on heavier stock.

KM toner & UV KM toner & UV The temperature to apply the UV coating needs to be quite a bit higher to get good adhesion with the KM toner.

Thank you very much

I would like to receive your 6500 solutions book. Thanks Ernie

We too are considering a Xerox 700. What would be the most common issues to be aware of with this machine. We currently have a KM 6500 and do about 35-40k monthly.

Good copier but inconsistant Good copier but inconsistant We have had a 6500 for 2 years and it does do a very nice job of color. Our main problem with it has been staying consistant for any length of time. Our service does its best although I think they are not fully trained on this machine...

KM6500 comment KM6500 comment We have a 6500 with a Fiery that is just under 2 years old and for the first year it ran great. This past year we have had increasingly more service calls. It seems as though the machine is starting to wear out and we aren't doing the kind of volume that most...

Getting employees on board Getting employees on board What are some ways to start employees thinking into a lean direction? Many do not like to accept such changes. To me it is easy to see the benefit (see Gorelicks pictures in another thread) . When someone goes to a store or restaurant and...