Recent content by faisal.ta

Hi For the rubber roller what is the formula which we can use to determine the nip strip width? We have rollers with different diameter. SO on the basis of diameter what formula can be applied?

Hi We have requirements to print on Bubble envelopes. What is the normal practice to print on these envelopes? Do we use screen printing method or if offset, how can we do the same? Faisal

Hi Can we please know the technicalities of the UV Inks. What are the implications it has with temperature. And the normal shelf life of the UV Inks mentioned is 6 months. What happens after that? The ink being not good adhesive on the foil sheets, does the ink has anything to do with it? And...

Hi Can i know what all are the tests to be done for the PU inks. What are its characteristics and its settings for the machine. Faisal

Hi For commercial printing industry, do we have any instruments which can compare a digital file or a test sample file and then compare it with the printed sheet and show the difference. Here its not to do with colors, but look at the images and then compare and give suggestions? Is there any...

Hi Alois We checked the Ink and Damp forme roller settings and everyting is OK. The Impression setting we will check for the same. As mentionded above the problem is not with the Gear or work side. What i meant was with the Couples. For Eg: Printing Couple 1,3,5,7 ( 1 Cyan, 3 Magenta, 5...

Hi We are having a Manugraph Single width Press. We face a strange problem of Image wear in Black Plates after 70,000 impressions. This Image wear happens only in Left Side of the Tower ( Where we have the Page 1 & Back Page ) where as in the same tower the right side is ok and goes on upto 1.5...