Recent content by graficworx

And if you run out of plate prep, you can use a light application of SoftScrub paste without bleach, works just as good as the Hurst or other plate preps in removing toning. I'm sure anyone who had used laser poly plates for a few years has weird tricks like this. If your anywhere near Seattle...

The only problem to watch for on long numbering jobs is one head skipping, and the numbers being off. I used to run a job with many of the same number, and occasionally a head will get off, and if you don't catch it foul the whole job. I now number that job digitally.

Forgot to mention I have 2 extra blades.

If anyone needs any parts, we have a working Linotype 560 we took out of production just recently. We started using CTP years ago, but were still outputting film for use by screen printers and pad printers. If you need any parts, let me know.

We recently took our Polar Eltromat 72 out of service, and I saved all the control boards, switches, and blade stop cylinder. If anyone needs some parts, let me know. All four channels were working. I know the one time I had to have a board repaired it took me months to find someone to do it...

Avantra has a much better source of aftermarket parts than the Mako. This should always be a big consideration when buying any machinery, especially used machines that are no longer made anymore. I have seen Avantra's run for almost 30 years with very little work done to them if the are...

Are the lines oriented in the same direction as the travel of film through the imagesetter and processor? Is the film a new roll or close to the end of the roll? How old is the film? If you can, do two tests: 1) image film on your imagesetter and have someone else develop it, and 2) have...

One thing you have to remember is that the inkjet labels will not be water safe, so if a wine bottle is chilled, then it gets condensation, the ink will rub off if touched. Even worse would be to put it in an ice bucket! I evaluated all the inkjet label printers several years ago, and all had...

The short answer is no SMB will never work as well as AFP. Macs don't rely on a file extension to tell them what type of file it is, instead they use a metadata file. Since the windows machine doesn't understand this, the metadata file can be lost, and your files will show as unreadable in OS X...

We just recently scrapped our old Polar Mohr Electromat 72 cutter, but I kept all the boards knowing how hard it is to find parts/replacements. Also kept some of the switches and the blade safety lock. If anyone is looking for parts, let me know. All five channels worked when taken out of...

We just recently scrapped our old Polar Mohr Electromat 72 cutter, but I kept all the boards knowing how hard it is to find parts/replacements. Also kept some of the switches and the blade safety lock. If anyone is looking for parts, let me know.

What font types are you talking about? Were these fonts installed through font book or through an external font manager?

That probably won't work, as since 10.6 debuted there have been substantial hardware architecture changes, and the disc won't have the latest drivers until a more recent software update (10.6.8 is the latest). What sort of networking issues are you having between the 10.4 and 10.6 machines? SMB...

If it's better, but still not great, you may need to clean all the rollers really good with a pumice like paste. Calcium can build up on the rollers.

Crestlines are sort of known for this. Whats happening is there is too much ink in the ink rollers, and is getting transferred up to the water. Once that happens, better to clean everything and start over. You can either increase the fount solution a tiny bit, or just back off on the ink. Also...