Alois, it seemed that way which is what concerned me. I think it has always either been in time or out of time and the pressman is making a fuss now about it for some reason. We checked all the air lines, vlaves and shafts to make sure there was no debris or any material in any of the air...
Hi All, so the timing of the feeder head seems to be in time, there was a lot of play from the belleville stack in the feeder head so we replaced with a spring which seemed to help the issue quite a bit. It seemed as though the shaft that controlled the forwarding suckers was not touching the...
Thank you, we have tried the wedges and seemed to not make too much difference as the air is cutting off on the forwarding suckers halfway through the movement forward. Do you have an idea on where I can find the timing adjustment and how to make the adjustment for the pressman?
Good afternoon all,
My Feeder head on our Lithrone28 is dropping the sheet before the first set of feed board wheels are coming in contact with it. It is also not blowing out of the boot on the feeder head at that time too leaving me with usually two bent corners on the gripper of our press...
As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.
“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.
Learn how…….