Power to the blower comes from the imager. Upon initialization a signal is sent to the blower to power it up. If the imager does not receive a signal saying that the blower is powered up, you get the E418C error.
Power down the 8600 and remove the cover of the blower unit. Power on the 8600...
The vacuum hoses go into a filer canister. If by adjusting the air sensor got rid of the problem, could it be you have a dirty filter in the canister which is impeding the flow?
The same thing happened to our PT R-8600 a few months ago. I switched the ends of the cable connecting the blower to the imager and installed a strain relief on the cable to keep the connector from flexing. I did this thinking that because our blower unit gets moved around a bit, the wires in...
As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.
“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.
Learn how…….