Recent content by jokar

I have been using a little program called Number Press for numbering my NCR jobs on a Ricoh Pro 1107ex. It cost less then $80 and quite easy to use.

We have been running NCR on our Ricoh C900 and 1107ex for about 3 years now. We are using Xero/Form or Superior NCR stock running single sided or duplexing. I recently purchased a small and inexpensive software program called Number Press which has saved us countless hours of off-line numbering...

We have had Freeflow for many years...I think we started with a version 4...and upgraded to version 9 without any problems. I would suggest you request a different Xerox analyst to checkout your system, they all are not created equal. We also have EFI MicroPress and have had constant...

Craig You will probably have similar problems with a 1107ex. There is very little that isn't plastic inside. We had problems with "dog eared" sheets, when duplexing, because of worn plastic parts but our service tech was able to modify some of the parts ot correct this. If you get a good service...

Ricoh 1107ex Ricoh 1107ex We have had a Pro 1107 EX for a little over 2 years and after the initial set up, which took about 4 months, it has been reliable. We use it mostly for running 20# (70% of the time) and NCR. Most of our problems were with the Micro Press which drives the 1107ex and a...

We have had our Count EZ Creaser since Dec. 2010 and it's the greatest. Very easy to set up. We have used it with 20lb bond to 110lb index and get a nice flat perf. We have used it to crease up to 10pt gloss cover without any problems. I strongly recommend it. I also would like to add that...