Magnus59's latest activity

  • M
    Magnus59 replied to the thread Xpo Error 10094.
    Update: The expose was failing because coolant was not getting to the head Swapped around the hoses for the coolant and it works now
  • M
    Magnus59 replied to the thread Xpo Error 10094.
    We are in Australia, so not sure if you can support us here. Machine is 2008 Quantum with upgrade to external PC. Xpo version is...
  • M
    Magnus59 replied to the thread Kodak Lotem Magnus Trendsetter support.
    Do you have a solution for this? https://printplanet.com/threads/xpo-error-10094.293955/#post-316061
  • M
    Magnus59 replied to the thread Xpo Error 10094.
    Good luck with that if it's a Magnus 400, they EOL'd them so we're on our own. Machine has run perfectly for over a week, now the same...
  • M
    Magnus59 replied to the thread Xpo Error 10094.
    I got ours running again by restoring the configuration from a backup, this caused some other weird behaviour (cannot prepare drum for...
  • M
    Magnus59 replied to the thread The best inkjet under $1500 for sharp text printing?.
    The way that resolution is defined on inkjet printers is somewhat inconsistent. Take for example the old Scitex Iris, with a stated...
  • M
    Magnus59 replied to the thread Die cutting tolerance between shapes.
    We usually allow a minimum of 5mm between cutting rules, but best to ask your die cutting contractor or the die maker as they will have...
  • M
    Magnus59 replied to the thread Is Antivirus Software Still Needed?.
    Norton (which used to be a good software company when Peter Norton owned it) and McAfee are the worst for spamming, I have used Sophos...
  • M
    Magnus59 replied to the thread Help with lines showing only on black.
    They look like the lines you get when either your lasers need calibrating or your lead screw needs lubricating, however it should be on...
  • M
    Magnus59 replied to the thread Aqueous Coating.
    I would not normally run an aqueous coating over UV inks, usual practice would be to dry the UV inks using interdeck UV lamps then apply...
  • M
    Magnus59 posted the thread Xpo Error 10094 in Kodak Systems.
    Anybody have any idea what this error means Plate loads, expose gets to 29%, unloads blank plate, fails with Xpo error 10094
  • M
    Magnus59 replied to the thread Prinergy 8.3 Workshop Quick Question....
    The client should be in the WkspInstall share on your Prinergy server
  • M
    Magnus59 replied to the thread CTP Plates ECO3 problem.
    Looks like you need to change the startup sequence on the press, allow a few more rotations on dampers only prior to dropping the inkers
  • M
    Magnus59 replied to the thread Are Riso ComColor worth it?.
    For a reliable workhorse of a photocopier, I would lean towards Konica Minolta
  • M
    Magnus59 replied to the thread How to better dial in CIP3 data for KBA 106.
    Heidelberg will sell the Prinect Production Manager as a separate module to replace Prepress Interface, we did get a quote from them...
Show older items

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.

Learn how…….

 
Back
Top