maxon's latest activity

  • M
    maxon replied to the thread CTP Plates ECO3 problem.
    This looks like press related.
  • M
    maxon replied to the thread CTP Plates ECO3 problem.
    Antura and Alunet are good quality I used them both you don't risk removing or softening the image. Try Antura first it's the Eco3...
  • M
    maxon replied to the thread CTP Plates ECO3 problem.
    Is it newspaper printing ? If so, a bit of plate cleaner should be ok(ish) but beware of coating residue recontaminating the plate in...
  • M
    maxon replied to the thread CTP Plates ECO3 problem.
    The Eclipse plates are negative working, their standard sensitivity of 120-130 mJ/sqcm will decrease if stored in cold environment or...
  • M
    maxon replied to the thread CTP Plates ECO3 problem.
    Craveiro, toning on large areas on DOP plates points to either underexposure on incorrect cleaning sequence on press. Your Eco3 supplier...
  • M
    maxon replied to the thread CTP Plates ECO3 problem.
    craveiro, what type of plates exactly ? Have you used them before or first time use ?
  • M
    maxon replied to the thread Screen 4300S Errors.
    Open the blower as ronnie said, then go to service menu > actuators and start-stop the MBL1 (drum blower) repeatedly keeping an eye on...
  • M
    maxon replied to the thread Plate consistency.
    Gianni, in addition to what gordo said before : - bear in mind these are almost certainly all negative working plates. As lasers write...

PressWise

A 30-day Fix for Managed Chaos

As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.

“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.


Learn how…….

 
Back
Top