Recent content by Michel Walinga

Dear Jeroen, The size and way of working is different, if you want we can discus this over the Phone (in Dutch) simply call Tetterode Almere and ask for me (press instructor Tetterode)

As far as I can see this file was ment to be for a SM 52! Every value is for an inkzone regards, Michèl

Press Release - Landa

For the reccord, a XL 105P has no 18.000 speed. It's maximum speed is 15.000 and this is often a standard A XL 105 has a enhanced Perfecting device than the SM serie. The XL perfecting works trouble free, and you do not need to look inside for air settings (preset and state of the art) Beside...

normaly this is done at the press, or at the powder device itself. It all depends on the type of spraying device an level of pressautomation

Try the FOGRA Organisation

Is it possible to change the starting point? (degrees)

Try pulling out the return pipe, the return pipe should be higher than the infeed pipe. Dous your blade chamber has a feed in from the middle, and do you have it on higher speeds? Try to let the coating float into the barrel (on a alluminum pate or so) this wil let out the air and not pump it...

Is this topic still open (do I need to respond?) Michèl walinga HDM Press Instructor Tetterode bv / the Netherlands

If the machine / software is not to old.... place your machine at stand stil! press the suction head on and plus and minus (+/-) at he same time (3 buttons at the same time (the air punp is getting on but you can simply turn it of again) If everything went ok you can calibrate the screen now...

If your PPI is up to date you can buy a USB version of the Flash card writer / Reader...