The simplest way for me to explain this is- older systems were treated and etched and then when processed the non printing surface was all ready to accept water. Today the plate is etched as it is processed so the developers have a higher PH. At least this is what the manufacturer's have...
#1 - need UV inks, #2- drying time depends on Dyne level of the ink if it's flaking. Try running a sheet through with the heaters on. The before it cools off run it through with UV on it. See if it flakes. If it doesn't run a small load on heat then cover with plastic, run another small load...
Sounds like a cylinder pressure problem. I used 77 for years and it only moved when pressure would force it. You need a clean cylinder to start with no residue from chemicals. Also can a form roller be bouncing?
Tango by Dotworks
Tango by Dotworks
I am a rep for Tango, I thought I should make that clear. Dotworks purchased the intellectual property for this product and is manufacturing the equipment. The system can and does output the file in either stochastic or halftone screens. We suggest that it...
As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.
“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.
Learn how…….