Config Password
Config Password
There is no password to change an MCE to another device. As mentioned in other posts, it must be done thru a service dongle by a service tech. The tech must open a call for your request and then will be sent a license to make changes. The field techs can not...
These are some of the possiblle issues wth the head;
-Exposure head reset with "head reset" command
-Faulty EH-BP (exposure head to backplane) cable
-Exposure head digital board faulty or not mounted correctly
-Faulty head
-Exposure head crashed or reset due to head firmware bug
-Faulty...
If you want to eliminate the CTP causing the registration issues you can create a job the has cross hairs in 4 corners of the image area and place a few more in the middle, top and bottom of the plate. Image the plate, depending if its positive or negative,take a look the image and burn the same...
Does it happen on all plates or a specific plate? Its possible you may have a few of the following issues; faulty LEC(Lead Edge Cylinders) cylinders left and right(leaking or timing adjustment), cracked pivot blocks on the Lead edge grippers (on drum), or loose screws that secure the left&right...
As any print professional knows, printing can be managed chaos. Software that solves multiple problems and provides measurable and monetizable value has a direct impact on the bottom-line.
“We reduced order entry costs by about 40%.” Significant savings in a shop that turns about 500 jobs a month.
Learn how…….